Abstract:Carbon fiber-reinforced silicon carbide matrix (C f /SiC) composites have been widely used in aerospace for its superior properties. However, due to high hardness, heterogeneity, and anisotropy, many problems such as machining damage, low process efficiency, and rapid tool wear are encountered in machining C f /SiC composite. In this study, laser-induced oxidation-assisted milling (LOAM), as novel hybrid machining process, was proposed to enhance machinability of C f /SiC composites. Pulsed laser was used to induce oxidation reaction between C f /SiC composites and oxygen. Easily removable loose and porous oxides were produced, which were simultaneously removed with milling tool, leading to improved material removal rate and tool life. Oxidation mechanisms and influences of laser parameters on oxidation behavior of C f /SiC composite were studied. Conventional milling (CONV) without the assistance of laser was also performed on C f /SiC composite for comparative analysis. Milling force, tool wear, and surface quality were studied in detail. Under laser irradiation, C f /SiC composite was modified into metamorphic-layer that consisted of oxide layer and transition layer. Material irradiated with laser got melted, vaporized, and then reacted with oxygen, producing oxide. Oxide layer was formed due to the accumulation of oxide. Increasing laser energy density boosted oxidation reaction and increased the thickness of oxide layer. In contrast, increase in laser scanning speed decreased thickness of oxide layer. Results show that cutting force was extremely low and no tool wear occurred during milling oxide layer, indicating significant enhancement in machinability. Abrasive wear mainly occurred on flank face when milling transition layer. Surface damages, for instance fiber fracture and matrix fragmentation, were significantly contained by LOAM. Surface roughness Sa obtained via LOAM was 9.5 μm, which was lower than that obtained by CONV (35 μm). This study indicates that LOAM can achieve high-efficiency processing, low-defect surface, and prolonged tool life when machining C f /SiC composite.

Micro-milling of 65 vol% SiCp/Al composites with a novel laser-assisted hybrid process

Enhanced machinability of SiCp/Al composites with laser-induced oxidation assisted milling

Enhancing the Machinability of C f /SiC Composite with the Assistance of Laser-induced Oxidation during Milling

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Improved machinability of TiB2–TiC ceramic composites via laser-induced oxidation assisted micro-milling

Study on the surface layer formation of aluminum matrix composites and associated machinability in precision milling based on laser melting modification

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

Machinability improvement in milling of SiCf/SiC composites based on laser controllable ablation pretreatment

Study on Machinability of SiCp/Al Composites by Laser-Induced Oxidation-Assisted Turning

Influence of micron and nano SiC<sub>p</sub> on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy

Investigation on the machinability of SiCp/Al composite by in-situ laser assisted diamond cutting

Study on the processing performance of 60% SiCp/Al composite materials assisted by longitudinal and torsional ultrasonic vibration milling

Experimental and FEM study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning

High speed, high power density laser-assisted machining of Al-SiC metal matrix composite with significant increase in productivity and surface quality

Influence of micron and nano SiCp on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy

Preparation and Analysis of Micro-Holes in C/SiC Composites and Ablation with a Continuous Wave Laser

Experimental study on laser assisted ultrasonic elliptical vibration turning (LA-UEVT) of 70% SiCp/Al composites

A study of laser machining combined with dynamic chemical etching in micro‐hole drilling of 2.5D SiCf/SiC composites

Hybrid-hybrid turning of micro-SiCp/AA2124 composites: A comparative study of laser-and-ultrasonic vibration-assisted machining

Effects of Ultrasonic Nanolubrication on Milling Performance and Surface Integrity of SiCp/Al Composites

Character and Mechanism of Surface Micromachining for C/SiC Composites by Ultrashort Plus Laser