Abstract:The mechanical and electrical deterioration of chromium (Cr) thin films sputtered onto polyethylene terephthalate (PET) substrates under tensile strain was studied. Understanding mechanical and electrical stability due to imposed strain is particularly important for device reliability, as the demand for flexible electronic devices increases. Cr thin films, widely spread across the field of electronic and sensor applications, face crack propagation with electrical degradation with tensile stress that can seriously compromise the performance. Accordingly, this study offers new findings on how Cr film thickness might influence crack formation and electrical resistance differently and also the general guidelines for flexible electronic component design with respect to long-term durability. Electrical resistances were measured while mechanically stretching 100- and 200 nm thin sheets. The study focused on crack development and propagation mechanisms in both film thicknesses and their effects on percentage change in electrical resistance (PCER). Scanning electronic microscopy (SEM) was used to characterize surface morphology and observe cracks as the strain rose. Early crack formation in 100 nm Cr films led to rapid PCER increases due to quick crack propagation and fast electrical degradation. Thicker 200 nm films, however, showed a more gradual PCER rise with fewer but deeper cracks, indicating a regulated strain response. Unlike the sharp PCER spike in 100 nm films, 200 nm samples were more variable, with three out of four showing a slight PCER decrease at the end, hinting at partial crack repair or conductive realignment before full failure. These results underscore the role of layer thickness in managing crack propagation and electrical stability, relevant for flexible electronics and strain sensors. This paper is aligned with the ninth goal of the United Nations Sustainable Development Goals, specifically Target 9.5: Enhance Research and Upgrade Industrial Technologies.

The Electrical and Mechanical Behaviors of Copper Thin Films Deposited on Polyethylene Terephthalate Under Tensile Stress

Crack Development and Electrical Degradation in Chromium Thin Films Under Tensile Stress on PET Substrates

Electro-Mechanical Properties of Molybdenum Thin Film On Polyethylene Terephthalate Subjected to Tensile Stress

Temperature and Flexural Endurances of Aluminum-Doped Zinc Oxide Thin Films on Flexible Polyethylene Terephthalate Substrates: Pathways to Enhanced Flexibility and Conductivity

Mechanical Flexibility and Electrical Reliability of ZnO-Al Thin Films on Polymer Substrates Under Different External Deformation

An Experimental Investigation of Failure Behavior of Conducting Polythiophene Coating Films

Size Effect on Stretchability of Cu Films on Wrinkled Polydimethylsiloxane Substrates

Assessing the Effect of Twisting and Twisting Fatigue on ZnO:Al Thin Film Performance on PEN and PET Substrates

Study on elastic modulus of ultra-thin copper films by in-situ SEM-SPM nanoindentation

Deformation and Fracture Behavior of Electrocodeposited Alumina Nanoparticle/Copper Composite Films

High Ductility of A Metal Film Adherent on A Polymer Substrate

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

Interface and Friction Properties of Copper-embedded Polyethylene Terephthalate Filament

Mechanical behavior of thin films due to in-plane tensile and fatigue loadings

Processing and Specimen Thickness to Grain Size (t/d) Ratio Effects on Tensile Behaviour and Microformability of Copper Foils

Strain‐sensing behavior of flexible polypropylene/poly(ethylene‐co‐octene)/multiwalled carbon nanotube nanocomposites under cyclic tensile deformation

Highly Sensitive Ultrathin Flexible Thermoplastic Polyurethane/Carbon Black Fibrous Film Strain Sensor with Adjustable Scaffold Networks

Strain Rate Sensitive Stretchability and Fracture Behavior of Nanocrystalline Cu Films on Flexible Substrate

Electronic durability of flexible transparent films from type-specific single-wall carbon nanotubes

Highly stretchable and strain-insensitive multilayered electromagnetic interference shielding films prepared via a simple soaking-infiltration strategy

Highly stable and strain-insensitive metal film conductors via manipulating strain distribution