Abstract:The microstructure and mechanical characteristics of the AZ61 magnesium alloy with varying RE (RE) content during the extrusion-forging process were thoroughly examined using metallography, SEM, EDS, and XRD. Findings indicate that as the RE content increases, the β-Mg 17 Al 12 phase is significantly diminished, primarily resulting in a microstructure composed of Al 4 Ce and Al 8 Mn 4 Ce phases or Al 3 Nd and Al 4 Ce phases, along with a minor presence of Al 4 La phase, which appears in black granular or agglomerated forms along the extrusion axis. Following die forging, the RE phases in the AZ61+xRE Mg alloy's microstructure experienced secondary fragmentation due to triaxial compressive stress, leading to a drum-shaped or S-shaped distribution of the fractured RE material, without any spheroidization or new phase formation occurring during deformation, while the β-Mg 17 Al 12 phase was entirely dissolved in the matrix. Post die forging, the mechanical properties of the AZ61+xRE magnesium alloy showed significant enhancement, with the AEZ641 alloy exhibiting the highest increases in tensile strength and yield strength, at 8.5 and 26.2%, respectively. Nonetheless, the elongation of all four alloys decreased markedly, by 42 to 52%, and hardness increased by 3.5 to 7.1%. As RE content rose, the yield strength, tensile strength, elongation, and hardness of the as-forged AEZ611 alloy reached values of 220 MPa, 302.3 MPa, 11.25%, and 65.8 HRE, respectively, showcasing the best overall mechanical properties at room temperature. During the transition from extrusion to die forging, the macrofracture exhibited distinct necking, while the microfracture revealed numerous pits, with a significant presence of second phase or RE particles located at the pits' bottoms. The fracture mechanism was identified as a mixed fracture with characteristics of toughness.

Improved mechanical performance of double-pass extruded Mg-Gd-Er-Zr alloys with various rare earth contents

Effects of grain refinement and precipitate strengthening on mechanical properties of double-extruded Mg-12Gd-2Er-0.4Zr alloy

Effect of rare earth elements on deformation behavior of an extruded Mg-10Gd-3Y-0.5Zr alloy during compression

Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation

Evolution of Bimodal-Structure and Achieving Ultra-High Yield Strength in the As-Extruded ZK70 Alloy Via Gd Addition

Study on the Mutual Effect of La and Gd on Microstructure and Mechanical Properties of Mg-Al-Zn Extruded Alloy

Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy

Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg–Zn–Yb–Zr extrusion alloys

Development of low rare-earth containing magnesium alloy with high strength-ductility synergy by engineering nano-spaced lamellae

Modification of the Tensile Performance of an Extruded ZK60 Magnesium Alloy with the Addition of Rare Earth Elements

Effect of extrusion temperature on microstructure, mechanical properties, and deformation mechanism of Mg-2.5Er-0.6Zr alloy

Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg–6.0Zn–0.5Mn alloy

Microstructure and mechanical properties of extruded ZK60 magnesium alloy containing rare earth

Effect of Double Plastic Deformation on Microstructure and Mechanical Properties of High-Content Rare-Earth AZ61 Mg Alloy

Effect of Nd addition on the microstructure and mechanical properties of extruded Mg-Gd-Zr alloy

Microstructure and mechanical properties of the Mg98.5Zn0.5RE1 (RE=Gd and/or Y) alloys processed by equal channel angular pressing

Development of high mechanical properties and moderate thermal conductivity cast Mg alloy with multiple RE via heat treatment

Strengthening of Mg Alloy with Multiple RE Elements with Ag and Zn Doping via Heat Treatment

Cyclic Deformation Behavior of a Rare-Earth Containing Extruded Magnesium Alloy: Effect of Heat Treatment

Microstructure and Mechanical Properties of Moderate-Speed Extrudable Mg-Gd-Sm-Zr Alloy

Evolution of strength with rare-earth content in highly-alloyed Mg-Gd-Y alloys