Abstract:The microstructure and mechanical characteristics of the AZ61 magnesium alloy with varying RE (RE) content during the extrusion-forging process were thoroughly examined using metallography, SEM, EDS, and XRD. Findings indicate that as the RE content increases, the β-Mg 17 Al 12 phase is significantly diminished, primarily resulting in a microstructure composed of Al 4 Ce and Al 8 Mn 4 Ce phases or Al 3 Nd and Al 4 Ce phases, along with a minor presence of Al 4 La phase, which appears in black granular or agglomerated forms along the extrusion axis. Following die forging, the RE phases in the AZ61+xRE Mg alloy's microstructure experienced secondary fragmentation due to triaxial compressive stress, leading to a drum-shaped or S-shaped distribution of the fractured RE material, without any spheroidization or new phase formation occurring during deformation, while the β-Mg 17 Al 12 phase was entirely dissolved in the matrix. Post die forging, the mechanical properties of the AZ61+xRE magnesium alloy showed significant enhancement, with the AEZ641 alloy exhibiting the highest increases in tensile strength and yield strength, at 8.5 and 26.2%, respectively. Nonetheless, the elongation of all four alloys decreased markedly, by 42 to 52%, and hardness increased by 3.5 to 7.1%. As RE content rose, the yield strength, tensile strength, elongation, and hardness of the as-forged AEZ611 alloy reached values of 220 MPa, 302.3 MPa, 11.25%, and 65.8 HRE, respectively, showcasing the best overall mechanical properties at room temperature. During the transition from extrusion to die forging, the macrofracture exhibited distinct necking, while the microfracture revealed numerous pits, with a significant presence of second phase or RE particles located at the pits' bottoms. The fracture mechanism was identified as a mixed fracture with characteristics of toughness.

Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy

Modification of the Tensile Performance of an Extruded ZK60 Magnesium Alloy with the Addition of Rare Earth Elements

The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys

Grain refinement and improved mechanical properties of Mg-4Zn-0.5Ca-0.5RE magnesium alloy by thermomechanical processing

Effect of Double Plastic Deformation on Microstructure and Mechanical Properties of High-Content Rare-Earth AZ61 Mg Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Improved ductility of hot extruded Mg-0.5Zn-0.5Zr-1RE alloy by Li addition

Microstructure and mechanical properties of extruded ZK60 magnesium alloy containing rare earth

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Improved mechanical performance of double-pass extruded Mg-Gd-Er-Zr alloys with various rare earth contents

Development of low rare-earth containing magnesium alloy with high strength-ductility synergy by engineering nano-spaced lamellae

Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg–Zn–Yb–Zr extrusion alloys

Effect of extrusion temperature on microstructure, mechanical properties, and deformation mechanism of Mg-2.5Er-0.6Zr alloy

Development and characteristics of a low rare-earth containing magnesium alloy with high strength-ductility synergy

Effect of Nd and Y Addition on Microstructure and Mechanical Properties of Extruded Mg-Zn-Zr Alloy

Influence of rare earth addition on microstructures and mechanical properties of high-pressure die casting Mg–8Zn–6Al alloy

Microstructures and Mechanical Properties of a High-Strength Mg-3.5Sm-0.6Zn-0.5Zr Alloy

Effect of Ce Addition on Modifying the Microstructure and Achieving a High Elongation with a Relatively High Strength of As-Extruded AZ80 Magnesium Alloy

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States

Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation

Achieving excellent strength-ductility combination of Al-aided Mg-Gd-Al-Zr-Zn alloys fabricated by cold metal transfer-based wire-arc directed energy deposition via uniform equiaxed grains and multiple precipitates