Abstract:High strength cast Mg-RE (magnesium-rare earth) alloys usually show a poor balance between strength and ductility, typically high strength with low ductility. Grain coarsening during solution treatment is one of the reasons for the reduced ductility. La element has very limited solubility in Mg and the La-containing second-phase is expected to pin the grain boundaries and restrict the significant grain coarsening during solution treatment. Therefore, different amounts of La addition are introduced to the Mg-Gd-Zn casting alloy and the microstructure and mechanical properties are systematically studied. The addition of La results in the formation of the Mg12La second-phase along the grain boundaries during solution treatment, significantly increasing the number density of the ss' precipitates while slightly reducing their sizes. The Mg12La phase along the grain boundaries restricts grain coarsening, resulting in very low grain coarsening rates in the La-containing alloys. Compared with high strength cast Mg-RE alloys in literature, the present La-containing alloys indicate better balance between strength and ductility. The 0.4 La alloy exhibits the highest yield strength (YS) of 247 MPa and ultimate tensile strength (UTS) of 397 MPa with moderate elongation (El) of 5.8% in the under-aged condition; while the 0.2 La alloy with the highest product of strength and elongation (PSE) of 4.63 GPa center dot% presents a good combination of high strength and outstanding elongation (YS: 245 MPa; UTS: 383 MPa; El: 12.1%) in the peakaged condition. Micro-alloying with La element is expected to be an effective strategy to improve the strength and ductility of cast Mg alloys simultaneously.y

Study on the Mutual Effect of La and Gd on Microstructure and Mechanical Properties of Mg-Al-Zn Extruded Alloy

Effects of Zn and Gd Contents and Their Ratios on Microstructure and Mechanical Properties of As-Cast and As-Extruded Mg−8Li Alloys

Effects of Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy

Effect of La Addition on Microstructure, Mechanical Behavior, Strengthening and Toughening Mechanisms of Cast Mg-Gd-Zn Alloy

Effects of Alloying Elements on the Microstructure and Mechanical Properties of Mg-Zn-Gd Alloys

Influences of Gd on the Microstructure and Strength of Mg–4.5Zn Alloy

Mechanical properties of Mg-Gd-Zr alloy by Nd addition combined with hot extrusion

Microstructure and Mechanical Properties of Magnesium Alloy AZ81 with Gd

Microstructure and Mechanical Properties of Extruded Mg–Gd–Y–Zn Alloy with Mn or Zr Addition

Effect of Zn/(Gd+Y) ratio on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy

The Effect of Gd and Zn Additions on Microstructures and Mechanical Properties of Mg-4sm-3nd-Zr Alloy

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

The Role of Gd on the Microstructural Evolution and Mechanical Properties of Mg-3Nd-0.2Zn-0.5Zr Alloy

Effect of Nd addition on the microstructure and mechanical properties of extruded Mg-Gd-Zr alloy

Effect of Gd Content on Microstructure and Mechanical Properties of Mg-xGd-Zr Alloys Via Semicontinuous Casting

Microstructure evolution difference in Mg96.5Gd2.5Zn1 alloys extruded from as-cast and solution-treated states

Influence of Zn on the microstructure and mechanical properties of Mg-Gd-Zr alloy

Effects of Mn, Zr on microstructure and properties of Mg-Gd-Y alloys

The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys

Microstructure and Mechanical Properties of Extruded Mg-Zn-Nd-Y-Zr-Ca Alloy

Influence of Extrusion Ratio on Microstructure and Tensile Properties of Mg–Gd–Y–Zn–Zr Alloy