Abstract:Asymmetric property of wedge lens in 3 optical path which is used as frequency separation, and focusing element is considered to be an unfavourable factor for target alignment in inertial confinement fusion (ICF). Furthermore, the thickness of wedge lens in 3 optical path will lead to laser induced damage inevitably. For the purpose of scheme improvement of final optical assembly, types I and II noncollinear sum frequency generation in KDP crystal at room temperature are discussed based on nonlinear coupled wave theory. As illustrated by simulated result, in addition to type II collinear SFG used in ICF recently, 351 nm (3) waves can be generated by type I or II noncollinear SFG process. This method can realize color separations of , 2, 3 in far field without asymmetric element such as wedge lens and posses adequate tolerance of matching angle corresponding to the high efficiency conversion. As calculated, for type I SFG, when the noncollinear angle is in the interval from 0 to 19.99, phase matching condition can be satisfied in KDP crystal. The noncritical phase matching angle 3 is 90 and the corresponding noncollinear angle is about 19.99. The tolerance of mismatching angle is about 20 mrad. For type II SFG, the noncollinear angle interval that can satisfy phase matching process is about 0-13.55. Like type I SFG, there is also an noncritical solution in type II process whose matching angle is about (3) = 86.53. Because of the smaller effective nonlinear coefficient in this case, high efficiency conversion needs about 5 cm thick SFG crystal under 1 GW/cm2. Correspondingly, tolerance of mismatching angle is about 20 mrad. Because of the harsh tolerance of noncollinear angle between and 2 and for the purpose of compactness of final optical assembly, another method of noncollinear SFG is proposed: a piece of silica wedge with 12 wedged angle is mounted behind the SHG crystal in order to produce a 3.5 mrad intersection angle between and 2, and after type II noncollinear SFG process, , 2, 3 will be frequency separated in far field automatically by using thin lens. The tolerance of incident angle corresponding to high efficient conversion is about 1.0 mrad. This scheme can improve the the final optical assembly used recently.

General design and experiment for separated final optics assembly on high energy laser system

Researches on Laser Damage Resistance of Optical Films

Optimization of cleaning technique for mitigating particulate contamination upon final optics assemblies

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Study on design of high-power fiber fused components

Optimization of large-aperture optics clean assembly method

The Characterization of Laser-Induced Particles Generated from Aluminum Alloy in High Power Laser Facility

Laser Performance Upgrade for Precise ICF Experiment in SG-Ⅲ Laser Facility

Assembly Modeling and Error Analysis of Large Laser Optics

Study of airflow regime upon optic inside frequency multiplying device and achievement of cleaning technique

An Efficient Laser Decontamination Process Based on Non-Radioactive Specimens of Nuclear Power Materials

A Design of Debris Mitigation System for High-Repetition-rate Petawatt Laser Experiments

Silica final lens performance in laser fusion facilities: HiPER and LIFE

Study on the Interaction Between Nanosecond Laser and 6061 Aluminum Alloy Considering Temperature Dependence

Numerical simulation analysis of high efficient SFG and color separation in far field in high power laser facility based on noncollinear phase matching by KDP crystal

Optimal design of ultrahigh-energy laser amplifier chain with high storage energy extraction.

Design And Manufacture Of Continuous Phase Diffractive Optical Element For Beam Transform

Mitigation of a novel phase-defect-induced laser damage mechanism on NIF final optics

Laser-induced damage growth of large-aperture fused silica optics under high-fluence 351 nm laser irradiation

Investigation of aerosol generation through laser cleaning of various surfaces and optimization of mist & spray scavenging

Separation Capability and Optimization of Working State for a Laser Isotope Separation Facility