Abstract:Micro-/nanosized organic–inorganic hybrid perovskite single crystals (SCs) with appropriate thickness and high crystallinity are promising candidates for high-performance electroluminescent (EL) devices. However, their small lateral size poses a great challenge for efficient device construction and performance optimization, causing perovskite SC-based light-emitting diodes (PSC-LEDs) to demonstrate poor EL performance. Here, we develop a facile liquid-insulator bridging (LIB) strategy to fabricate high-luminance PSC-LEDs based on single-crystalline CH3NH3PbBr3 microflakes. By introducing a blade-coated poly(methyl methacrylate) (PMMA) insulating layer to effectively overcome the problems of leakage current and possible short circuits between electrodes, we achieve the reliable fabrication of PSC-LEDs. The LIB method also allows us to systematically boost the device performance through crystal growth regulation and device architecture optimization. Consequently, we realize the best CH3NH3PbBr3 microflake-based PSC-LED with an ultrahigh luminance of 136100 cd m–2 and a half-lifetime of 88.2 min at an initial luminance of ∼1100 cd m–2, which is among the highest for organic–inorganic hybrid perovskite LEDs reported to date. Moreover, we observe the strong polarized edge emission of the microflake-based PSC-LEDs with a high degree of polarization up to 0.69. Our work offers a viable approach for the development of high-performance perovskite SC-based EL devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.2c00488.Schematic reparation process of the perovskite SCs, cross-sectional SEM images of the perovskite SC and PSC-LED, in-plane XRD and SAED pattern of the microflake, schematic illustration of the home-built EL measurement system, EL performance of the polycrystalline perovskite film-based LEDs, angle-dependent EL spectra of the PSC-LED, PLQY and TRPL data of the microflakes prepared with and without FOTS treatments, UPS spectra of the perovskite SCs, waveguide behavior of the MAPbBr3 SC, and the comparison of the representative PSC-LEDs reported to date. (PDF)Movie S1: The PSC-LED is operated at a consistent voltage of 7.0 V. (MP4)This article has not yet been cited by other publications.

Preparation of Dome-Shaped SiO$_\text{2}$/Al$_\text{2}$O$_\text{3}$ Composite-Patterned Sapphire Substrate for High-Performance Mini-LED Backlight Modules

Efficient Mini/Micro-Perovskite Light-Emitting Diodes

Efficiency improvement analysis of nano-patterned sapphire substrates and semi-transparent superlattice contact layer in UVC light-emitting diodes

Design and fabrication of micro-led display with sapphire micro-reflector array

The Implementation of Sapphire Microreflector for Monolithic Micro-LED Array

Application of patterned sapphire substrate for III-nitride light-emitting diodes.

Nanoimprinted patterned sapphire with silica array for efficient InGaN-based green mini-LEDs

Enhancing light extraction efficiency of the inclined-sidewall-shaped DUV micro-LED array by hybridizing a nanopatterned sapphire substrate and an air-cavity reflector

Fabrication of Wafer-Scale Nanopatterned Sapphire Substrate by Hybrid Nanoimprint Lithography

Fabrication of the Patterned Sapphire Substrate by the Imprint Lithography with the Flexible Hybrid Mold

Small-sized nitride phosphors achieving mini-LED backlights with superhigh brightness and ultralong durability

Nanosurface-reconstructed perovskite for highly efficient and stable active-matrix light-emitting diode display

Process optimization of preparing CMOS backplane for ultrahigh pixel density red Micro-LED display

Alleviating the Crosstalk Effect Via a Fine-Moulded Light-Blocking Matrix for Colour-Converted Micro-Led Display with a 122% NTSC Gamut

High-Luminance Microsized CH 3 NH 3 PbBr 3 Single-Crystal-Based Light-Emitting Diodes via a Facile Liquid-Insulator Bridging Route

P‐11.2: Super‐thin Mini‐LED Direct Back Light for Liquid Crystal Displays

Monolithic High-Performance Micro-Leds Using Planar-Geometry Pixelation Process for High-Resolution Micro-Display Applications

Suppressing optical crosstalk for GaN/InGaN based flip-chip micro light-emitting diodes by using an air-cavity patterned sapphire substrate as a light filter

Fully Enclosed Composite Micro/Nano‐Package for High‐Quality Micro‐LED Display Pixels and In Situ Nanoimprint Technology

Improved performance of GaN-based light emitting diodes with nanopatterned sapphire substrates fabricated by wet chemical etching

Spatial Cross-Linking Strategy for Realizing Stable and Efficient Perovskite Light-Emitting Diodes toward Microscale Displays