Abstract:In this study, Cd1-x Na x Cu3Ti4O12 (x = 0, 0.02, 0.04, 0.06, and 0.08) ceramics were prepared via a solid-state method. The phase composition, microstructure, and defect characteristics as well as optical, dielectric, and nonlinear properties of the ceramics were systematically studied. A CuO second phase was detected in doped samples. Grain boundary precipitates, Na with a low melting point, and oxygen and cation vacancies together caused the grain size to first increase and then decrease with an increase in the Na+ doping amount. The abundant emerging cation vacancies with an increase in Na+ content led to a decrease in the optical energy band. The sample with x = 0.04 exhibited the highest ε' value (∼35 800) due to its largest grain size. Moreover, it possessed a lower tan δ (∼0.053) at 10 kHz, which was attributed to the multiplication of insulating grain boundaries. The huge dielectric constant originated from Maxwell-Wagner polarization at low frequencies and followed the internal barrier effect model. The lowest tan δ (∼0.037) and optimal nonlinear properties (α = 3.66 and E b = 3.82 kV cm-1) were obtained in the sample with x = 0.08, which were associated with its highest grain boundary resistance and barrier height. Electric modulus data proved that dielectric relaxation at low frequencies was associated with grain boundaries. Dielectric anomalies in the high temperature range were attributed to oxygen vacancies.

The enhanced cutoff frequency of dielectric constant for K-doped Na0.5Y0.5Cu3Ti4O12 ceramics

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Rare Earth Doped CaCu3Ti4O12 Electronic Ceramics for High Frequency Applications

Microstructure evolution, dielectric properties, and nonlinear response of Na+-doped CdCu3Ti4O12 ceramics

Anti-reduction of Ti4+ and improved quality factor in Cu-doped Ca0.61Nd0.26TiO3 ceramics

Enhanced dielectric properties and improved thermal stability in TiO 2 -based ceramics by Cu and Nb co-doping

High Dielectric Permittivity Behavior in Cu-Doped Catio3

Low dielectric loss, colossal permittivity, and high breakdown electric field in Al-doped Y2/3Cu3Ti4O12 ceramics

Modulation of defects and electrical behaviors of Cu-doped KNN ceramics by fluorine-oxygen substitution.

Electric and Dielectric Behaviors of Y-Doped Calcium Copper Titanate: Rapid Communications of the American Ceramic Society

Microstructure and dielectric properties of Nd doped CaCu 3 Ti 4 O 12 synthesized by sol–gel method

Mechanisms for optimizing the dielectric properties of spinel Li<sub>10</sub>ZnTi<sub>13</sub>O<sub>32</sub> ceramics by Na<SUP>+</SUP> doping

Improved High‐Q Microwave Dielectric Ceramics in CuO‐Doped BaTi4O9–BaZn2Ti4O11 System

Different Additives Doped Ca–Nd–Ti Microwave Dielectric Ceramics with Distorted Oxygen Octahedrons and High Q × F Value

(Cu1/3nb2/3)4+ Ionic Substituting Effects, Low-Temperature Sintering Behaviors, and Improved Temperature Stability of Ba3Nb4Ti4O21 Microwave Dielectric Ceramics

Enhanced Dielectric Properties in (in, Nb) Co-Doped BaTiO3 Ceramics

Thermal behavior of La3+, Ni2+ and Sn4+ co-doped CaCu3Ti4O12 ceramics dielectric response

The Lowered Dielectric Loss Tangent and Grain Boundary Effects in Fluorine-Doped Calcium Copper Titanate Ceramics

A-site K-doping to enhance room-temperature TCR of polycrystalline La0.8Sr0.2-K MnO3 ceramics

Dielectric and Piezoelectric Properties of Fe2O3-doped (na0.5k0.5)0.96li0.04nb0.86ta0.1sb0.04o3 Lead-Free Ceramics

Computational and experimental investigations of the giant dielectric property of Na1/2Y1/2Cu3Ti4O12 ceramics