Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Energy-saving extractive distillation process for the separation of close-boiling 2, 6-xylenol and p-cresol mixture

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Efficient separation of cresol isomers using azeotropic coupling pressure-swing distillation: From separation mechanism to process integration

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Process Design, Optimization and Intensification for the Efficient Purification of the Green Solvent Cyclopentyl Methyl Ether

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Energy-saving Investigation of Organic Material Recovery from Wastewater Via Thermal Coupling Extractive Distillation Combined with Heat Pump Based on Thermoeconomic and Environmental Analysis

Mechanism analysis and energy-saving intensified exploration of green mixed solvents extractive distillation to separate ether-containing azeotropes

Separation for diethoxymethane/ethanol/water by a thermally coupled extractive pressure swing distillation process with mixed solvent

Economic, environmental, exergy (3E) analysis and multi-objective genetic algorithm optimization of efficient and energy-saving separation of diethoxymethane/toluene/ethanol by extractive distillation with mixed extractants

Separation mechanism and thermodynamic phase behavior of n-propanol/p-xylene azeotrope from petrochemical wastewater by green solvents

Energy-saving extractive distillation system using o-xylene as an entrainer for the high-purity separation of dimethyl carbonate/methanol azeotrope

Systematic method of screening deep eutectic solvents as extractive solvents for m-cresol/cumene separation

Sustainable Process Design and Multi-Objective Optimization of Efficient and Energy-Saving Separation of Xylene Isomers Via Extractive Distillation Based on Double Extractants

Economy, Exergy, Energy Consumption and Environmental Human Toxicity Potential Assessment of Vacuum Extractive Distillation Coupled Pervaporation Process for Separating Acetone/Isopropanol/Water Multi-azeotropes System

Energy Efficient and Environmentally Friendly Pervaporation-Distillation Hybrid Process for Ternary Azeotrope Purification.

Economic and Environmental Evaluation for Purification of Diisopropyl Ether and Isopropyl Alcohol Via Combining Distillation and Pervaporation Membrane

Investigation of Energy-Efficient and Sustainable Reactive/pressure-Swing Distillation Processes to Recover Tetrahydrofuran and Ethanol from the Industrial Effluent

Process Design and Multi-Objective Optimization of Efficient Heat Utilization Distillation Based on the Influence of Pressure and Entrainer Flow on Separation Performance

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Design and multi-objective optimization of hybrid extractive distillation process for separating the toluene-methanol-water ternary azeotrope