Abstract:Co-firing with high Si/Al additives has been considered as an effective method to mitigate ash-related issues of Zhundong coal during combustion. Thus, in this paper, shale char rich in Si/Al obtained from pyrolysis of oil shale was selected as an additive of Zhundong coal to investigate the AAEM migration and ash characteristics. The results revealed that after blending shale char during combustion, the sodium/calcium retention ratios reached 72%-88% and 90%-98%, respectively. When the proportion of shale char was 5%, the sodium/calcium retention ratios were the highest, and the fouling and slagging tendency was the lowest. The sodium/calcium elements in Zhundong coal were fixed in the ash by shale char, and their volatilization was inhibited. With an increase in the blending ratio of shale char, the AFTs of mixed fuels exhibited an upward trend. When the proportion of shale char increased from 0% to 25%, the ST and DT of mixed ash increased by 79°C and 150°C. Shale char had a excellent effect on enhancing the AFTs of Zhundong coal. Further, the primary minerals in Zhundong coal were mainly calcite, anhydrite and quartz, as well as a small amount of thenardite, periclase and rankinite. After blending shale char into Zhundong coal, some silicoaluminates in different forms, such as nepheline, anorthite and akermanite etc. formed during combustion. More AAEM-containing minerals in Zhundong coal transformed to aluminosilicate phase, which effectively reduced their corrosivity. During individual combustion of Zhundong coal, the ash particle presented spherical in the molten state, and formed large cluster and sintered ash (>100 μm). When the shale char was added during combustion, a large amount of refractory minerals with larger particle size generated, such as silicoaluminates or mullite. These minerals could maintain their inherent shape in large particle size rather than sintering. Likewise, the fine ash particles ( 100 μm) accounted for 80.69% at final temperature of 1150°C. When the shale char was added during combustion, the content of cluster ash decreased to less than 5%, suggesting that the slagging issues had been effectively alleviated.

Mechanisms and characteristics of ash layer formation on bed particles during circulating fluidized bed combustion of Zhundong lignite

An experimental investigation into bed particle agglomeration and ash deposition during circulating fluidized bed gasification of Zhundong lignite

Ultrafine particulate matter formation in the early stage of pulverized coal combustion of high-sodium lignite

An experimental investigation into the effect of flue gas recirculation on ash deposition and Na migration behaviour in circulating fluidized bed during combustion of high sodium Zhundong lignite

Investigation into scavenging of sodium and ash deposition characteristics during co-combustion of Zhundong lignite with an oil shale semi-coke of high aluminosilicate in a circulating fluidized bed

Investigation of Ash Deposition Characteristics in Full-Scale Circulating Fluidized Bed Boiler Burning Zhundong Coal

Ash formation characteristics in co-combusting coagulation sludge and Zhundong coal

Fine particulate formation and ash deposition during pulverized coal combustion of high-sodium lignite in a down-fired furnace

Understanding the Competition Mechanism between Na2O and CaO for the Formation of the Initial Layer of Zhundong Coal Ash

The morphological and mineralogical characteristics and thermal conductivity of ash deposits in a 220 MW CFBB firing Zhundong lignite

Ash deposition behavior of a high-alkali coal in circulating fluidized bed combustion at different bed temperatures and the effect of kaolin

Ash Aerosol Formation from Oxy-Coal Combustion and Its Relation to Ash Deposit Chemistry

Understanding Ash Deposition for the Combustion of Zhundong Coal: Focusing on Different Additives Effects

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Investigation on the ash characteristics and AAEM migration during co-combustion of Zhundong coal and shale char in a fixed bed

Understanding the mechanism of ash deposition on boiler heating surface: The lattice Boltzmann and molecular dynamics simulations

Ash Deposition of Zhundong Coal in a 350 MW Pulverized Coal Furnace: Influence of Sulfation

Mineral manipulation of Zhundong lignite towards fouling mitigation in a down-fired combustor

Effect of oil shale semi-coke on deposit mineralogy and morphology in the flue path of a CFB burning Zhundong lignite

Mechanism of Quartz Bed Particle Layer Formation in Fluidized Bed Combustion of Wood-Derived Fuels

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging