Abstract:Co-firing with high Si/Al additives has been considered as an effective method to mitigate ash-related issues of Zhundong coal during combustion. Thus, in this paper, shale char rich in Si/Al obtained from pyrolysis of oil shale was selected as an additive of Zhundong coal to investigate the AAEM migration and ash characteristics. The results revealed that after blending shale char during combustion, the sodium/calcium retention ratios reached 72%-88% and 90%-98%, respectively. When the proportion of shale char was 5%, the sodium/calcium retention ratios were the highest, and the fouling and slagging tendency was the lowest. The sodium/calcium elements in Zhundong coal were fixed in the ash by shale char, and their volatilization was inhibited. With an increase in the blending ratio of shale char, the AFTs of mixed fuels exhibited an upward trend. When the proportion of shale char increased from 0% to 25%, the ST and DT of mixed ash increased by 79°C and 150°C. Shale char had a excellent effect on enhancing the AFTs of Zhundong coal. Further, the primary minerals in Zhundong coal were mainly calcite, anhydrite and quartz, as well as a small amount of thenardite, periclase and rankinite. After blending shale char into Zhundong coal, some silicoaluminates in different forms, such as nepheline, anorthite and akermanite etc. formed during combustion. More AAEM-containing minerals in Zhundong coal transformed to aluminosilicate phase, which effectively reduced their corrosivity. During individual combustion of Zhundong coal, the ash particle presented spherical in the molten state, and formed large cluster and sintered ash (>100 μm). When the shale char was added during combustion, a large amount of refractory minerals with larger particle size generated, such as silicoaluminates or mullite. These minerals could maintain their inherent shape in large particle size rather than sintering. Likewise, the fine ash particles ( 100 μm) accounted for 80.69% at final temperature of 1150°C. When the shale char was added during combustion, the content of cluster ash decreased to less than 5%, suggesting that the slagging issues had been effectively alleviated.

Mineral manipulation of Zhundong lignite towards fouling mitigation in a down-fired combustor

Ultrafine particulate matter formation in the early stage of pulverized coal combustion of high-sodium lignite

Effects of Na and Fe on the Formation of Coal-Derived Soot in a Two-Stage Flat-Flame Burner

Effect of CO2/H2O on the Incipient Ultrafine Particulate Matter Formation in Oxy-fuel Combustion of High-Sodium Lignite

Fine particulate formation and ash deposition during pulverized coal combustion of high-sodium lignite in a down-fired furnace

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Investigation on the ash characteristics and AAEM migration during co-combustion of Zhundong coal and shale char in a fixed bed

Numerical and Experimental Study on the Deposition of Fine Particulate Matter During the Combustion of Pulverized Lignite Coal in a 25 Kw Combustor

Understanding Ash Deposition for the Combustion of Zhundong Coal: Focusing on Different Additives Effects

Combined effect of ball-milled ash and ammonium dihydrogen phosphate on fouling, slagging, and combustion characteristics of high-sodium zhundong coal

Investigation into scavenging of sodium and ash deposition characteristics during co-combustion of Zhundong lignite with an oil shale semi-coke of high aluminosilicate in a circulating fluidized bed

Effect of oil shale semi-coke on deposit mineralogy and morphology in the flue path of a CFB burning Zhundong lignite

The characteristics of mineralogy, morphology and sintering during co-combustion of Zhundong coal and oil shale

Mineral Distribution in Pulverized Blended Zhundong Coal and Its Influence on Ash Deposition Propensity in a Real Modern Boiler Situation

Understanding effect of phosphorus-based additive on ash deposition characteristics during high-sodium and high-calcium Zhundong coal combustion in drop-tube furnace

Sulfate Removal by Kaolin Addition To Address Fouling in a Full-Scale Furnace Burning High-Alkaline Zhundong Coal

Reduction of Fine Particulate Matter by Blending Lignite with Semi-Char in a Down-Fired Pulverized Coal Combustor

Ash Deposition of Zhundong Coal in a 350 MW Pulverized Coal Furnace: Influence of Sulfation

Additive capable of effectively restraining Zhundong coal slagging and fouling and application method thereof

Mineral transformation during rapid heating and cooling of Zhundong coal ash

Effect of calcined kaolin on PM0.4 formation from combustion of Zhundong lignite