Abstract:Residual emissions from post-combustion CO2 capture plants (PCC) must be reduced to zero or recaptured from the atmosphere to be compatible with long-term climate change goals. For amine-based CO2 capture, increasing CO2 capture fractions requires maintaining sufficient driving force of absorption at the top of the absorber column by reducing lean solvent loadings. To produce low lean loadings without excessively increasing the specific thermal energy input, increased operational pressures are required in the CO2 stripper, inevitably leading to higher temperatures, which may increase the specific thermal degradation rate of the solvent. Concurrently, for solvents that react rapidly with dissolved O2, increased residence time in the absorber due to the increased packing heights also associated with high capture fractions may increase the specific oxidative degradation rate as the direct contact with O2 in the flue gas is extended. Through process modelling and the application of a newly developed monoethanolamine (MEA) degradation framework, we investigate the effect on solvent degradation rates of increasing CO2 capture rates up to those that result in no net CO2 addition to the atmosphere. We do this for three key energy-producing processes: a combined cycle gas turbine, an energy-from-waste facility, and a steam methane reformer. In a first-of-a-kind study, we demonstrate that for a 35% wt. MEA-based solvent under steady-state conditions, solvent degradation is predicted to increase by 24% to 138% as a result of decreasing lean loadings and increased absorber residence time (process modifications that are thought to be beneficial when increasing CO2 capture fractions) from 53 - 208 gMEA/tCO2 when a 95% CO2 gross capture fraction is achieved to 125 – 257 gMEA/tCO2 when 99.2 - 99.8% is achieved (i.e. when 100% of the added CO2 is captured). Further analysis provides evidence that process modifications, such as intercooling of the absorber column and reduced stripper sump residence times, may be useful in reducing the rates of solvent degradation, providing critical insights to future test campaigns and project developments. However, limitations of this study remain; the degradation framework provides the instantaneous predicted MEA consumption rate of the system at a point in time and does not consider the catalytic effects that many impurities present in an operation plant will have on the reactions, potentially impacting degradation rates. Nonetheless, this serves as the first step towards understanding the effect of increasing CO2 capture fractions in post-combustion CO2 capture plants. Long-term tests with appropriate solvent management practices are required to fully quantify solvent degradation rates when operating at 100% added CO2 capture fractions.

The parameters optimization for a CFBC pilot plant experimental study of post-combustion CO2 capture by reactive absorption with MEA

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Systematic study of aqueous monoethanolamine‐based CO2 capture process: model development and process improvement

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

MEA-based CO2 capture: a study focuses on MEA concentrations and process parameters

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

New improvement of amine-based CO2 capture processes using heat integration and optimization

Sensitivity Analysis of Post Combustion Carbon Capture Using Monoethanolamine (MEA) as a Solvent. A Simulation Study

Monoethanolamine (MEA) degradation rates in post-combustion CO2 capture plants with the capture of 100% of the added CO2

Experimental And Rate-Based Modeling Study Of Co2 Capture By Aqueous Monoethanolamine

Evaluating Energy-Efficient Solutions of CO2 Capture Within Tri-solvent MEA+BEA+AMP Within 0.1+2+2–0.5+2+2 Mol/l Combining Heterogeneous Acid–Base Catalysts

Simulation and pilot plant measurement for CO2 absorption with mixed amines

Evaluating CO2 Capture Performance of Trisolvent MEA–BEA–AMP with Heterogeneous Catalysts in a Novel Bench-Scale Pilot Plant

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Evaluating CO 2 Capture Performance of Trisolvent MEA–BEA–AMP with Heterogeneous Catalysts in a Novel Bench-Scale Pilot Plant

A multiobjective experimental based optimization to the CO2 capture process using hybrid solvents of MEA-MeOH and MEA-water

A Comparative Study of MEA and DEA for Post-Combustion CO 2 Capture with Different Process Configurations

Multi-stage Solvent Circulation Absorption Enhancement: System Optimization for Energy-Saving CO2 Capture

Experimental Investigation of Amine Regeneration for Carbon Capture through CO2 Mineralization

Multistage Circulation Absorption Improvement: Simulation and Energy-Saving Evaluation of an Innovative Amine-Based CO2 Capture Process