Abstract:More than one million tons of secondary aluminum dross as a hazardous waste are produced by aluminum manufacturers per year throughout the world, which imposes high disposal costs and serious environmental problems. As secondary aluminum dross is considered as an alumina-rich inorganic waste, this study aims to propose a promising approach for clean production of activated-alumina as a widely-used adsorbent, catalyst and catalyst support. In this paper, synthesis and characterization of high crystalline activated-alumina nanopowder from secondary aluminum dross using a novel five-step leaching-based process are presented. To optimize the process, various parameters of dross particle size, leaching time, leaching temperature, acid concentration, and liquid-to-solid ratio were studied using One-Factor-At-a Time approach (OFAT). For the following optimum leaching conditions: particle sizes between 38 and 75 μm, leaching time of 120 min, leaching temperature of 85 °C, acid concentration of 5 M, and the liquid-to-solid ratio of 20 ml/g, the extraction efficiency of alumina was around 83%. The leach liquor was purified by adding 2 N NaOH resulting in sodium aluminate-rich solution. The purified liquor was treated by adding HCl to precipitate Al(OH)3, and the Al(OH)3 was then washed and calcined at 700 °C for 2 h to obtain alumina. Chemical composition, mineralogical phases, chemical bonds, morphology, and particle size distribution of the as-synthesized activated-alumina were determined using X-ray fluorescence (XRF), X-ray diffractometry (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), and dynamic light scattering (DLS), respectively. The as-synthesized activated-alumina exhibited 97.61% purity. Its XRD pattern showed mainly characteristic peaks of gamma phase of alumina. Morphological study by FESEM revealed that the as-synthesized alumina particles have rounded-corner shape. The crystal and average particle size values were about 18.47 and 513 nm, respectively.

High purity alumina production by leaching-ion exchange process: Design and flowchart proposal

Aluminum–iron separation in high‐acid leaching solution and high‐purity alumina preparation

Fabrication of Nano-Layer-structure Alumina Powders from an Alumina Concentrate Through an Intensified Bayer Process

Iron Removal from Bauxite by Oxalic Acid and Further Al Extraction by High-Pressure Alkali Leaching

PURIFICATION OF TAN RAI ALUMINUM HYDROXIDE WITH ACETIC ACID AND PREPARATION OF HIGH PURE NANOSIZE α-ALUMINA

A promising green process for synthesis of high purity activated-alumina nanopowder from secondary aluminum dross

Mechanism of ultrasonic-enhanced leaching for separating organic impurities from the surface of bauxite and H 2 O 2 oxidation-CaO precipitation for purifying the leaching solution

A cleaner electrolysis process to recover alumina from synthetic sulfuric acid leachate of coal fly ash

A low-cost process for complete utilization of bauxite residue

Low-Temperature Treatment of Boehmitic Bauxite Using the Bayer Reductive Method with the Formation of High-Iron Magnetite Concentrate

Technology for High Pure Aluminum Oxide Production from Aluminum Scrap

Extraction of alumina from aluminum dross by a non-hazardous alkaline sintering process: Dissolution kinetics of alumina and silica from calcined materials

Developing a Low-Temperature, Carbon-Lean Hybrid Valorisation Process for Bauxite Residue (Red Mud) Towards Metallic Fe and Al Recovery

An Environmentally Friendly Design for Low-Grade Diasporic-Bauxite Processing

An Innovative Technique for Comprehensive Utilization of High Aluminum Iron Ore via Pre-Reduced-Smelting Separation-Alkaline Leaching Process: Part I: Pre-Reduced-Smelting Separation to Recover Iron

Extraction of alumina and silica from high-silica bauxite by sintering with sodium carbonate followed by two-step leaching with water and sulfuric acid

Extraction of Titanium, Aluminum, and Rare Earth Values from Upgraded Bauxite Residue

A Case Study of Producing Alumina from High-Sulfur Diasporic Bauxite: Sulfur-Containing Desilication Products and Pyrite in Red Mud

Extraction of alumina from coal fly ash generated from a selected low rank bituminous South African coal

Enhanced alumina recovery from secondary aluminum dross for high purity nanostructured γ-alumina powder production: Kinetic study