Abstract:The use of calcium oxide as a precipitant can achieve a nonammonia enrichment of a rare earth leaching liquor. However, an alkaline rare earth sulfate forms during the precipitation process, thus resulting in excessive SO42– content in the mixed rare earth oxides. Therefore, a stirring washing process for precipitation enrichment, which was obtained from calcium oxide precipitation, was investigated using a sodium hydroxide solution. It was determined that the Gibbs free energy of the stirring washing reaction, which was calculated by a group contribution method, was between −60 and −300 kJ/mol, depending on the different rare earth elements. The above results indicated that the reaction was thermodynamically feasible. The optimum conditions of the washing process were obtained, namely, a feed ratio of 2.85, a liquid–solid ratio of 6.5 mL/g, a stirring washing temperature of 35 °C, and a stirring washing time of 20 min. Under the optimal conditions, the purity and the SO42– content of the mixed rare earth oxides were 94.38% and 3.48%, respectively, and the stirring washing process with the sodium hydroxide solution had good recyclability. Moreover, the washing product was tested using thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscopy-energy-dispersive spectrometry (SEM-EDS), which verified that the stirring washing process with NaOH could effectively remove SO42– from the precipitation enrichment into solution. On this basis, a new extraction process of the ion-adsorption-type rare earth ore by magnesium salt leaching–calcium oxide precipitation–sodium hydroxide stirring washing is proposed. This new process can eliminate the traditional aluminum-removal process and effectively reduces the rare earth loss in the process. It can also solve the problem of the excessive SO42– content in the mixed rare earth oxides caused by the calcium oxide precipitation process. The research in this paper can have great significance for green, efficient extraction of the ion-adsorption-type rare earth ore and the improvement of resource utilization.This article has not yet been cited by other publications.

Mechanism of ultrasonic-enhanced leaching for separating organic impurities from the surface of bauxite and H 2 O 2 oxidation-CaO precipitation for purifying the leaching solution

Aluminum–iron separation in high‐acid leaching solution and high‐purity alumina preparation

Iron Removal from Bauxite by Oxalic Acid and Further Al Extraction by High-Pressure Alkali Leaching

Treatment and utilization of bauxite residue

Sulfur Removal of High-Sulfur Bauxite

Flotation enhancement of low-grade bauxite using oxalic acid as surface pretreatment agent

A way out of the alkaline bauxite residue: Synthesizing micro-electrolysis composite material towards the synergistic fenton degradation of high-concentration organic wastewater

The Alkaline Leaching Behavior of Silica Solid Solutions in the Product Obtained by Roasting the Mixture of High-Alumina Coal Gangue and Hematite

High purity alumina production by leaching-ion exchange process: Design and flowchart proposal

Suspension calcination and alkali leaching of low-grade high-sulfur bauxite: Desulfurization, mineralogical evolution and desilication

On the Mechanism of Sodic Removal from Bauxite Residue and Bauxite Desilication Products (BDP) Using Acetic Acid

Electricity-driven dealkalization of bauxite residue based on thermodynamics, kinetics, and mineral transformation

An Environmentally Friendly Design for Low-Grade Diasporic-Bauxite Processing

Formation Mechanism of an Undesirable By-Product in the Mild Hydro-Chemical Process for the Extraction of Alumina from Fly Ash and Its Mitigation

Extraction of alumina and silica from high-silica bauxite by sintering with sodium carbonate followed by two-step leaching with water and sulfuric acid

Catalysis of CuO on degradation of organic substance in Bayer liquid

Extraction of alumina from aluminum dross by a non-hazardous alkaline sintering process: Dissolution kinetics of alumina and silica from calcined materials

Sulfur Removal from High-Sulfur Bauxite during the Bayer Process

Research on the mechanism of sodium separation in bauxite residue synergy preparation of potassium-containing compound fertilizer raw materials by the hydrothermal method

Selective separation of aluminum, silicon, and titanium from red mud using oxalic acid leaching, iron precipitation and pH adjustments with calcium carbonate

Removal of Sulfate Ions from Calcium Oxide Precipitation Enrichment of a Rare Earth Leaching Liquor by Stirring Washing with Sodium Hydroxide