Treatment and utilization of bauxite residue

刘峙嵘,吴一峰,曾凯,李鹰
DOI: https://doi.org/10.3969/j.issn.1001-1935.2008.05.016
2008-01-01
Abstract:The process of ferric sulfate from bauxite residue by sulfuric acid leaching was investigated by orthogonal experiment. The orthogonal experiment was designed to investigate the effects of concentration of sulfuric acid, sulfuric acid consumption coefficient, reaction temperature and reaction time on Fe3+ leaching by the four factors in three values (concentration of sulfuric acid of 50 wt%, 40 wt% and 20 wt%; reaction temperature of 110, 90 and 70 °C; sulfuric acid consumption coefficient of 1.1, 1.0 and 0. 9; reaction time of 4.0 h. 3.5 h and 3.0 h). The eached slag was tested by chemca, analysis, XRD and IR. The results showed that the impact of factors on Fe3+ eaching in sulfuric acid solution decreased in the folowing order: concentration of sulfuric acid > reaction temperature > sulfuric acid consumption coefficient > reaction time. The optimum eaching reaction conditions: 40% sulfuric acid, the reaction temperature of 110 °C, sulfuric acid consumption coefficient of 1.1 and reaction time of 4 h. The principal component of bauxite residue changed from hematite into diaspore after the leaching in sulfuric acid solution. The ferric sulfate solution can be used to produce solid or liquid polymeric ferric sulfuric with stabilization and high alkaliza-tion, and the residue slag can be used as auxiliary in ceramcs.
What problem does this paper attempt to address?