Abstract:The extreme alkalinity of bauxite residue (BR) leads to difficulty with its reuse. Alkaline leachate and dust generation during the stacking process can pollute surrounding soil, air and water. In this work, co-pyrolysis of bauxite residue and sawdust was applied to rapidly produce a soil-like matrix that met the conditions for plant growth as demonstrated by ryegrass pot experiments. The present study aimed to characterize the detailed changes in physicochemical, mineral weathering, and microbial communities of the pyrolyzed BR with different ratios of saw dust after plant colonization for 2 months. With increasing sawdust addition during co-pyrolysis, the pH of BR decreased from 11.21 to 8.16, the fraction of macro-aggregates 0.25-2 mm in the water-stable agglomerates increased by 29.3%, and the organic carbon concentration increased from 12.5 to 320 mg/kg, whilst facilitating the degree of humification, which were all beneficial to its revegetation performance. The backscattered electron-scanning electron microscope-energy-dispersive X-ray spectrometry (BSE-SEM-EDS) results confirmed the occurrence of sodalite and calcite weathering on aggregate surfaces, and X-ray photoelectron spectroscopy (XPS) results of surface Al and Si compounds identified that some weathering products were clay minerals such as kaolinite. Furthermore, bacterial community composition and structure shifted towards typical soil taxonomic groups. These results demonstrate soil development of treated BR at an early stage. The technique is a combination of alkalinity regulation and agglomerate construction, which accelerates soil formation of BR, thus proving highly promising for potential application as an artificial soil substitute.

A facile method of resource recovery from bauxite residue by phosphoric acid treatment

Treatment and utilization of bauxite residue

Phosphorus removal and recovery from wastewater by highly efficient struvite crystallization in an improved fluidized bed reactor

Direct Phosphoric Acid Leaching of Bauxite Residue for Selective Scandium Extraction

Developing a Low-Temperature, Carbon-Lean Hybrid Valorisation Process for Bauxite Residue (Red Mud) Towards Metallic Fe and Al Recovery

A low-cost process for complete utilization of bauxite residue

Bauxite residue (red mud) treatment: Current situation and promising solution

Strengthening Solid–liquid Separation of Bauxite Residue through the Synergy of Charge Neutralization and Flocculation

The Utilization of Bauxite Residue with a Calcite-Rich Bauxite Ore in the Pedersen Process for Iron and Alumina Extraction

Rapid conversion of alkaline bauxite residue through co-pyrolysis with waste biomass and its revegetation potential

Dealkalization processes of bauxite residue: A comprehensive review

Electricity-driven dealkalization of bauxite residue based on thermodynamics, kinetics, and mineral transformation

Application of recycled ferric chloride for alkalinity regulation of bauxite residue

Deep dewatering of bauxite residue via the synergy of surfactant, coagulant, and flocculant: Effect of surfactants on dewatering and settling properties

Treating Waste with Waste: Activated Bauxite Residue (ABR) as a Potential Wastewater Treatment

Treatment of Phosphorus-Containing Raw Materials with Alkaline Solutions

Low-Temperature Treatment of Boehmitic Bauxite Using the Bayer Reductive Method with the Formation of High-Iron Magnetite Concentrate

Industrial wastes applications for alkalinity regulation in bauxite residue: A comprehensive review

Recovery of Rare Earths and Other Valuable Metals From Bauxite Residue (Red Mud): A Review

Optical and Dielectric Properties of Multiphase Phosphate Obtained from Phosphoric Acid Treatment of Bauxite Residue

High-Iron Bauxite Residue (Red Mud) Valorization Using Hydrochemical Conversion of Goethite to Magnetite