Abstract:Typical resins for UV-assisted additive manufacturing (AM) are prepared from petroleum-based materials and therefore do not contribute to the growing AM industry trend of converting to sustainable bio-based materials. To satisfy society and industry's demand for sustainability, renewable feedstocks must be explored; unfortunately, there are not many options that are applicable to photopolymerization. Nevertheless, some vegetable oils can be modified to be suitable for UV-assisted AM technologies. In this work, extended study, through FTIR and photorheology measurements, of the UV-curing of epoxidized acrylate from soybean oil (AESO)-based formulations has been performed to better understand the photopolymerization process. The study demonstrates that the addition of appropriate functional comonomers like trimethylolpropane triacrylate (TMPTA) and the adjusting of the concentration of photoinitiator from 1% to 7% decrease the needed UV-irradiation time by up to 25%. Under optimized conditions, the optimal curing time was about 4 s, leading to a double bond conversion rate (DBC%) up to 80% and higher crosslinking density determined by the Flory-Rehner empirical approach. Thermal and mechanical properties were also investigated via TGA and DMA measurements that showed significant improvements of mechanical performances for all formulations. The properties were improved further upon the addition of the reactive diluents. After the thorough investigations, the prepared vegetable oil-based resin ink formulations containing reactive diluents were deemed suitable inks for UV-assisted AM, giving their appropriate viscosity. The validation was done by printing different objects with complex structures using a laser based stereolithography apparatus (SLA) printer.

Low-Shrinkage and Degradable UV Imprint Lithography Based on Biomass-Derived Epoxidized Soybean Oil and Cardanol

Polyvinylpyrrolidone Hybrid Photoresist for Two-color Sensitive Direct Laser Writing

Eugenol-Based Siloxane Acrylates for Ultraviolet-Curable Coatings and 3D Printing

Green Synthesis of Soybean Oil-Derived UV-Curable Resins for High-Resolution 3D Printing

A Degradable Polycyclic Cross-Linker for UV-curing Nanoimprint Lithography

High Resolution Soft Mold for UV-curing Nanoimprint Lithography Using an Oxygen Insensitive Degradable Material

Towards environmentally friendly processing of ionic liquid based photoresist with a boosted lithography performance

UV-Light Curing of 3D Printing Inks from Vegetable Oils for Stereolithography

An Oxygen-Insensitive Degradable Resist for Fabricating Metallic Patterns on Highly Curved Surfaces by Uv-Nanoimprint Lithography

Synthesis and properties of a low-viscosity UV-curable oligomer for three-dimensional printing

Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

Synthesis of micro-crosslinked adamantane-containing matrix resins designed for deep-UV lithography resists and their application in nanoimprint lithography

Aqueous Developable and CO2‐Sourced Chemical Amplification Photoresist with High Performance

Synthesis of A Photo-Patternable Cross-Linked Epoxy System Containing Photodegradable Carbonate Units for Deep Uv Lithography

Versatile Epoxidized Soybean Oil-Based Resin with Excellent Adhesion and Film-Forming Property

Development of Dual-Curable Cellulose Nanofibrils-Reinforced Soy Protein Resins for 3D Printing

Solventless 3D Printed High-Temperature Resistant Cyclosiloxane-Containing Resin for Low-Shrinkage Ceramization and Nano-Functional Composite Development

Photoinitiator Free Resins Composed of Plant-Derived Monomers for the Optical µ-3D Printing of Thermosets

Synthesis and Optimization of a Free-Radical/Cationic Hybrid Photosensitive UV Curable Resin Using Polyurethane Acrylate and Graphene Oxide

Synthesis of End-Cap Enabled Self-Immolative Photoresists For Extreme Ultraviolet Lithography

Thermal stability of UV-cured vegetable oil epoxidized acrylate-based polymer system for 3D printing application