Abstract:The rapid and accurate measurement of in situ stress fields is one of the essential steps in geological engineering. Indoor acoustic emission tests and the Kaiser effect provide a promising prior peak stress measurement method. This paper aims to qualitatively explore the time delay mechanism of the Kaiser effect under uniaxial compressive stress. Acoustic emission tests were conducted with natural and water-soaked sandstone specimens to examine the time delay phenomenon of the Kaiser effect, and the typical Griffith fracture mechanics theory was adopted to explain the mechanism. The time delay of the Kaiser effect under uniaxial compressive stress was affected by the friction coefficient on the crack surfaces and the initial crack angle <span class="mathjax-tex">\(\beta\)</span>. The time effect was indirectly induced by the changes in the friction coefficient on the crack surfaces, and the friction coefficient was controlled by the water content in the rock specimen. A higher initial friction coefficient led to an earlier and easier time delay of the Kaiser effect. Consequently, from the aspect of the Kaiser effect, it was suggested that when testing in situ stress, measures should be taken to maintain the original moisture contents in the rock cores after they are drilled underground. Otherwise, the in situ stress should be tested within 7 days.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the time - delay mechanism of the Kaiser Effect (KE) under uniaxial compressive stress conditions. Specifically, the research aims to explore the influence of time - delay on the Kaiser Effect through experiments and explain the microscopic mechanism behind it. The Kaiser Effect refers to the phenomenon that when the stress applied on a rock sample is less than the previous maximum stress, the acoustic emission activity is relatively calm; when the stress exceeds the previous peak stress, the acoustic emission activity increases significantly. However, in actual operation, there is a certain time lag from rock drilling to sample processing and then to indoor acoustic emission testing, and this time lag may affect the detection accuracy of the Kaiser Effect. Therefore, understanding this time - delay mechanism is crucial for improving the accuracy and reliability of in - situ stress measurement.
### Research Background
In - situ stress measurement is a key issue in the process of underground engineering, such as tunnel construction and oil - gas extraction. In - situ stress plays an important role in preventing rockburst and predicting tunnel water inrush. Although the commonly used hydraulic fracturing and stress/strain release methods are effective, they are costly and time - consuming. In contrast, the indoor rock acoustic emission (AE) technique is not only low - cost and time - saving, but also has more advantages in measuring the complex stress conditions of deep - seated engineering and water - sensitive rock strata.
### Kaiser Effect and Its Challenges
The Kaiser Effect can reproduce the stress history of rock masses through acoustic emission activities. When the applied stress is less than the previous peak stress, the acoustic emission activity is less; when the stress exceeds its previous peak stress, the acoustic emission activity increases significantly. However, acoustic emission data are affected by multiple factors, including stress level, loading conditions, principal stress direction and rock microstructure, etc. In particular, there is a certain time lag from rock drilling to sample processing and then to indoor acoustic emission testing, and the influence of this time lag on the detection accuracy of the Kaiser Effect is still controversial.
### Research Objectives
This paper aims to propose suggestions on sample storage conditions in indoor rock testing, such as storage time and environment, through experiments. For this purpose, the time - delay mechanism of the Kaiser Effect under uniaxial compressive conditions was studied. The research is divided into the following parts:
1. **Experimental Setup**: The experimental equipment and test system are introduced.
2. **Experimental Results**: The acoustic emission parameters of natural and soaked sandstone samples are analyzed, and the influence of time - delay on the Kaiser Effect is revealed.
3. **Micro - damage Characteristics**: The micro - damage characteristics of natural and soaked sandstone samples are revealed through the waveform - based acoustic emission spectrum method.
4. **Time - Delay Mechanism**: The time - delay mechanism of the Kaiser Effect is explained based on the classical Griffith fracture mechanics theory.
### Experimental Methods
- **Experimental Equipment**: The WAW - 1000 rock mass mechanics test system is used to obtain rock mass mechanics data, and at the same time, an 8 - channel PCI - 2 acoustic emission device is used to record acoustic emission data in real time.
- **Sample Preparation**: Samples are taken from shallow - buried sandstone blocks in the Zhongliangshan quarry in Chongqing, and the sample size is Φ50 × 100 mm. There are five samples in each group. One group is loaded until final failure to detect the ultimate bearing capacity of sandstone, and other groups of samples are loaded until failure after different time - delays after pre - loading.
### Experimental Results
- **Macroscopic Failure Modes**: Natural sandstone samples undergo shear failure under uniaxial compressive stress conditions, and the angle of the main macroscopic crack is about 30 - 50°.
- **Kaiser Effect**: The effectiveness of the Kaiser Effect is estimated through acoustic emission parameters. The results show that when the time - delay is less than 3 days, the Kaiser Effect is effective; when the time - delay reaches 7 days, the Kaiser Effect begins to fail in some samples; when the time - delay exceeds 12 days, the Kaiser Effect completely disappears.
### Conclusions
The research shows that under uniaxial compressive conditions, the Kaiser Effect of natural sandstone samples is effective when the time - delay does not exceed 7 days. The Kaiser Effect of soaked sandstone samples is greatly affected by the water content, and as the water content increases, the Kaiser Effect gradually disappears. These results are helpful for optimizing the conditions of indoor rock testing and improving the accuracy and reliability of in - situ stress measurement.