Experimental Study of Rockburst Induced by Multi-axial Cyclic Compression: A Case of Jisan Sandstone with a Circular Opening
Dongqiao Liu,Yunpeng Guo,Chunguang Wang,Hehe Liu,Shaolei Du,Manchao He,Yang Wang,Jie Sun
DOI: https://doi.org/10.1007/s00603-023-03741-1
IF: 6.518
2024-02-11
Rock Mechanics and Rock Engineering
Abstract:In this study, a series of impact-induced rockburst experiments were carried out by applying multilevel cyclic stresses on a cubic sandstone with a circular opening. Information on rockburst evolution was monitored using video and AE techniques together. Experimental results show that the opening in the sandstone sample was observed to undergo rock grain ejection, rock spalling and buckling in sequence. AE activity under the lower cyclic stress level followed the Kaiser's effect, while the Felicity's effect of AE was also involved at the higher cyclic stress level. Multi-axial cyclic loading can shorten the fatigue life and fatigue strength of the sandstone sample. However, the multi-axial cyclic loading can obviously reduce the AE hits and its energy rate, in which case the proportion of the AE single with low frequency is less than those under the uni-axial cyclic compression. It is also found that the failure zone in the sandstone is characterized by V-shaped notch. The depth of the failure zone is reduced sequentially under uni-axial, bi-axial, and tri-axial cyclic compression, respectively. In contrast, the extent angle of the failure zone will increase. According to the observed profiles of the failure zone, the changes of friction angle of the sandstone are interpreted by the Mohr–Coulomb strength criterion, as well as movement of the failure line due to the fatigue damage. These findings can provide insights into the study of rock failure mechanisms under various dynamic disturbances.
geosciences, multidisciplinary,engineering, geological