Abstract:Partial discharges (PD) measurements provide valuable information for the condition assessment of the high voltage insulation systems. PD tests have become a fundamental tool to determine the status of high voltage elements, contributing to the quality assurance in high voltage equipment. Some reasons for the increasing usage of DP tests are based in the effectiveness of the new developments presented to achieve more reliable diagnosis. During the last five decades different approaches have been developed and applied to PD measurement and processing techniques. Significant efforts have been made to deal with the most common problems arising in on-site and on-line measurements: high levels of noise and interferences, the emergence of different PD sources simultaneously and the difficulty of locating the site of the defects and to identify the type of defects. In order to overcome all these drawbacks, this paper proposes an efficient method based in advanced measuring and diagnosis techniques, with the aim to achieve a proper sensitivity in PD measurements and an accurate assessment of the elements insulation condition. In PD measurements the main factors that condition the signal acquisition, the subsequent processing and the capability to obtain an accurate diagnosis are: selection of a suitable detection technique together with the type of sensors and their bandwidth, implementation of an effective noise filtering tool, development of a defect localization method and implementation of PD classification techniques for pattern recognition and defect identification. All these factors have been considered in this study and a complete measuring method together with powerful diagnostic tools are presented. Measurements in a test object consisting in a one-phase cable system were accomplished with real insulation defects, with the aim to show the effectiveness of the proposed method and the optimized analysis techniques.

An overview on the current status of partial discharge measurements on AC high voltage cable accessories

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

Radio-frequency Detection of Partial Discharge in Power Cable Joints

Partial discharge theory and technologies related to medium-voltage electrical equipment

Review on Detection and Analysis of Partial Discharge along Power Cables

Guarding MV cables on-line: With travelling wave based temperature monitoring, fault location, PD location and PD related remaining life aspects

Comparison of on-line partial discharge detection methods for HV cable joints

Selective PD Measurements on DC Cable Joints Using a HFCT-Balanced Circuit Arrangement

Advanced techniques for on-line PD measurements in high voltage systems

Investigation of partial discharge characteristics in XLPE cable insulation under increasing electrical stress

The Application of Partial Discharge Detection for the Condition Assessment of Xlpe Power Cables

Distributed Partial Discharge Detection Technology for High Voltage Cable Based on Ac Withstand Voltage

A novel calibration method for PD measurements in power cables and joints using capacitive couplers

A Thermal Excitation Based Partial Discharge Detection Method for Cable Accessory

Partial discharge detection on power equipment using a magneto-resistive sensor

On-Line Partial Discharge Localization in Power Cables Based on Electromagnetic Time Reversal Theory - Numerical Validation

A Review on the Classification of Partial Discharges in Medium-Voltage Cables: Detection, Feature Extraction, Artificial Intelligence-Based Classification, and Optimization Techniques

Diagnosis of Insulation Condition of MV Switchgears by Application of Different Partial Discharge Measuring Methods and Sensors

Review of Partial Discharge Activity Considering Very-Low Frequency and Damped Applied Voltage

Novel dual‐resonance damped alternating current testing system for offline partial discharge measurement of power cables

Detection and Identification Technologies of Wide Band Partial Discharge