Abstract:To improve the applicable performance of the engine and accomplish the determination of optimization, the crankshaft, as one of its essential components, is optimized based on experimental design and response surface method (RSM). First, the static analysis of the crankshaft is carried out. Over the solution, the maximum equivalent stress and deformation distribution of the crankshaft and the area with the most concentrated stress are obtained to provide the direction for subsequent optimization. Then the modal analysis is carried out to define the portions with large amplitude to prevent resonance. At the same time, based on the modal analysis results, the harmonic response of the crankshaft is examined to ensure that the crankshaft can avoid resonance and fatigue caused by forced vibration at different engine speeds. It also provides a theoretical basis for the further optimization design of the crankshaft. Then, through the experimental design and response surface optimization analysis, the optimization purpose of reducing the maximum equivalent stress, maximum deformation, and lightweight of the crankshaft is accomplished. Through the design expert software, the response surface model and fitting equation of the crankshaft are solved by the RSM, which provides a reference basis for optimizing the crankshaft. Finally, according to the optimization scheme, the crankshaft is reconstructed, and the optimized crankshaft model is compared with the original model. After optimization, the maximum equivalent stress is reduced by 9.43%, the maximum deformation is reduced by 3.68%, and the mass is reduced by 1.30%. At the same time, the first three natural frequencies are reduced by 10.28, 10.28, and 10.34%, which achieves the purpose of optimizing the crankshaft design. The research results provide effective theory and evidence for the structural design of the crankshaft.

Impact of web and counterweight shape factors on crank shaft design for better strength and optimised geometry

Engine Crankshaft Counterweight Design Optimization

A General Framework for Crankshaft Balancing and Counterweight Design

Crankshaft Optimization Based on Experimental Design and Response Surface Method

The Development of a Fillet Design Tool Based on Light-Weight Marine Diesel Engine Crankshafts

Fatigue failure prediction through Factor of Safety and Stress concentration in a malfunctioned AISI 4140 Automotive Crankshaft

Strength-to-Weight Optimization of Driver Shafts: A Comparative Analysis of Material Selection, Manufacturing Methods, Generative Design, and Topology Optimization using Fusion 360

Simulation-based dynamic optimal design of crankshaft counterweights

Design and Analysis of EN19 Centre Crankshaft

Finite element analysis of a vehicle diesel engine crankshaft

A two-step optimization for crankshaft counterweights

Component Hcf Research Based on the Theory of Critical Distance and A Relative Stress Gradient Modification

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Optimization for Compressor Crankshaft by Multi-Body Dynamics Analysis Method

An investigation of the effect of counterweight configuration on main bearing load and crankshaft bending stress

Design and optimization of multi-stage manufacturing process of stirling engine crankshaft

Dynamic Analysis of the Crank and Connecting Rod of Single-Cylinder Gasoline Engine Before and After Adjustment

Determination on the Operation Condition of Crankshaft of Diesel Engine and Its Static Strength Analysis

Lightweight Design and Evaluation of Crankshaft Based on Simulation Technology

Optimizing the Design and Material used for Connecting Rod through Finite Element Simulation