Abstract:During measurements, the crankshafts of marine engines are usually supported on a set of rigid prisms. Such prisms maintain a constant height position, cause different values of reaction forces and, consequently, may cause elastic deformations of the crankshafts. Thus, the measurements of the dimensions and geometry of the crankshaft may be distorted. This article proposes a measuring system developed to support the crankshaft with a set of flexible supports. These supports implemented the given reaction forces, which ensured the elimination of the crankshaft deformations, regardless of the possible deviations, i.e., in the coaxiality of the main crankshaft journals. The values of these forces were calculated using the finite element method (FEM). These calculations showed that in order to eliminate the crankshaft deformations, the values of the reaction forces must change not only on individual supports, but also with the change of the shaft rotation angle during the measurement. The numerical experiments showed that the application of flexible supports results in uniform contact reaction forces on adjacent main journal supports. This uniformity occurs regardless of the quality of the crankshaft geometry. Thus, the necessity to use a set of flexible supports for measuring marine engine crankshafts was confirmed. The research also showed that the values of the reaction forces ensuring the elimination of shaft deflections under the assumption of nodal support can be treated as corresponding to the resultant reaction forces realized by the prismatic heads.

Method to Increase the Accuracy of Large Crankshaft Geometry Measurements Using Counterweights to Minimize Elastic Deformations

Determination of geometrical deviations of large crankshafts depending on the adopted conditions of their fixing and support

Eliminating the Influence of Support Conditions on Geometric Shape Measurements of Large Crankshafts of Marine Engines

An Analysis of Reaction Forces in Crankshaft Support Systems

Evaluation of Model-based Control of Reaction Forces at the Supports of Large-size Crankshafts

Measuring Error Correction Method During Deflection Measurement Process of the Regular Hexagon Section Shaft Based on Lever-Type Measuring Mechanism

Impact of web and counterweight shape factors on crank shaft design for better strength and optimised geometry

Analysis of Contact Deformations in Support Systems Using Roller Prisms

Engine Crankshaft Counterweight Design Optimization

Computerised grinding procedure for large scale crankshaft machining

Precise Alignment Method of the Large-Scale Crankshaft During Non-Circular Grinding

Methodology for calculating the counterweight mass of a crank-and-rod mechanism

STUDY OF THE GEOMETRY OF GRINDING MACHINES USED FOR LARGE SCALE CRANKSHAFT MACHINING

Enhancing positioning accuracy of CNC machine tools by means of direct measurement of deformation

A General Framework for Crankshaft Balancing and Counterweight Design

Calculation of the Force Distortion in Non-Circular Crankshaft Grinding with Four-Point Rigidity Method

The Effect of Crankshaft Flexibility on the EHL of Connecting Rod Bearings

Simulation-based dynamic optimal design of crankshaft counterweights

Method for Calculating the Counterweight Mass of a Crank-and-Rod Mechanism