Abstract:To improve the applicable performance of the engine and accomplish the determination of optimization, the crankshaft, as one of its essential components, is optimized based on experimental design and response surface method (RSM). First, the static analysis of the crankshaft is carried out. Over the solution, the maximum equivalent stress and deformation distribution of the crankshaft and the area with the most concentrated stress are obtained to provide the direction for subsequent optimization. Then the modal analysis is carried out to define the portions with large amplitude to prevent resonance. At the same time, based on the modal analysis results, the harmonic response of the crankshaft is examined to ensure that the crankshaft can avoid resonance and fatigue caused by forced vibration at different engine speeds. It also provides a theoretical basis for the further optimization design of the crankshaft. Then, through the experimental design and response surface optimization analysis, the optimization purpose of reducing the maximum equivalent stress, maximum deformation, and lightweight of the crankshaft is accomplished. Through the design expert software, the response surface model and fitting equation of the crankshaft are solved by the RSM, which provides a reference basis for optimizing the crankshaft. Finally, according to the optimization scheme, the crankshaft is reconstructed, and the optimized crankshaft model is compared with the original model. After optimization, the maximum equivalent stress is reduced by 9.43%, the maximum deformation is reduced by 3.68%, and the mass is reduced by 1.30%. At the same time, the first three natural frequencies are reduced by 10.28, 10.28, and 10.34%, which achieves the purpose of optimizing the crankshaft design. The research results provide effective theory and evidence for the structural design of the crankshaft.

A General Framework for Crankshaft Balancing and Counterweight Design

A General Framework for Crankshaft Balancing and Counterweight Design

Study of Automatic Dynamic Balancing System for Engine Crankshaft

A two-step optimization for crankshaft counterweights

Balancing of Lightweight Crankshaft and its performance under Virtual Engine Operation

Engine Crankshaft Counterweight Design Optimization

Simulation-based dynamic optimal design of crankshaft counterweights

Impact of web and counterweight shape factors on crank shaft design for better strength and optimised geometry

The Inner Equilibrium Analysis and Counterweight Design of Engine

Balancing Optimization of a Motorcycle Engine Crankshaft for Vibration Reduction

Methodology for calculating the counterweight mass of a crank-and-rod mechanism

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Multi-Objective Optimization of Counterweights: A Substitute for the Balance Shaft or Mass Unbalancing in Three-Cylinder Engines

Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod

The Development of a Fillet Design Tool Based on Light-Weight Marine Diesel Engine Crankshafts

An investigation of the effect of counterweight configuration on main bearing load and crankshaft bending stress

Component Hcf Research Based on the Theory of Critical Distance and A Relative Stress Gradient Modification

Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor Crankshaft

Crankshaft Optimization Based on Experimental Design and Response Surface Method

Optimization Study of Engine Balance Shaft

Crankshaft and Bearing Analysis Process for a Light Duty Automotive Engine