Abstract:In coal mining engineering, the mechanical properties of rocks in coal-bearing formations are important for mining safety. In addition, lithological properties are among the most crucial factors affecting the mechanical properties of a given rock. To preliminarily address this important issue, several uniaxial compression tests were conducted on three types of rocks in coal-bearing formations: argillaceous siltstone, mudstone and silty mudstone. In all of the experiments, the acoustic emission (AE) technique was employed to detect the initiation and evolution of microcracks during the testing process, and the computed tomography method was then employed to further investigate the failure patterns of the different types of rock mass. The AE results showed that failure initiated at stress levels of approximately 0.18, 0.48 and 0.05 times the peak stresses for argillaceous siltstone, mudstone and silty mudstone, respectively. Furthermore, in the argillaceous siltstone, the accumulated AE events increased gradually during loading until macrofailure occurred; in contrast, obvious plateaus in the AE parameter curves existed in the stress regions at 60–70% and 35.5–50% peak stress for mudstone and silty mudstone, respectively. In the crack coalescence stage, a large number of low-energy microfractures occurred in the argillaceous siltstone, whereas a small number of high-energy microfractures occurred in the mudstone and silty mudstone. The results revealed that (1) the argillaceous siltstone was essentially destroyed by splitting, while the mudstone and silty mudstone samples were broken by shear fracture propagation; (2) for all of the coal-bearing formation rocks investigated in this work, when the fracture surface area was larger, the strain energy to be translated into surface energy was greater, and thus, more input energy was required when the peak strength was greater. Clearly, lithological properties, especially microstructural features, play a critical role in the mechanical properties of coal-bearing formation rocks. Therefore, a comprehensive evaluation should be considered in any analysis of mining safety.

Effect of Primary/Artificial Interface on Dynamic Failure Behavior of Combined Coal and Rock: Monitoring by High-Speed Imaging and Scanning Electron Microscopy

Experimental Study on Mechanical Properties and Energy Evolution Law of Coal-Rock Composite Structure under Different Interface Connection Modes

Mechanical behaviors and failure characteristics of coal-rock combination under quasi-static and dynamic disturbance loading: a case based on a new equipment

Simulation Experimental Investigations into the Mechanical Response and Failure Mechanisms of Coal–Rock Combinations

The failure behavior of coal-rock combined body under compression-shear loading

The strength characteristics and competitive failure mechanism of primary coal-rock combination considering interface damage quantity

Experimental Study on the Influence of Lithology and Rock-Coal Height Ratio on Mechanical Properties and Impact Effect of Combined Body

Experimental and numerical investigation on the mechanical characteristics and failure mechanism of cracked coal & rock-like combined sample under uniaxial compression

Image-based Numerical Study of Three-Dimensional Meso-Structure Effects on Damage and Failure of Heterogeneous Coal-Rock under Dynamic Impact Loads

Mechanical properties and failure modes of CRCB specimen under impact loading

Experimental and numerical simulation of loading rate effects on failure and strain energy characteristics of coal-rock composite samples

Impact of coal microstructure on the development of failure process

Experimental Research on Dynamic Failure of Rock–Cemented Material–Rock Interface Considering Strain Rate Effect

Modelling Heterogeneous Coal-Rock (HCR) Failure Patterns under Dynamic Impact Loads Using Image-Based Finite Element (FE) and Discrete Element (DE) Model

Effect of Confining Pressure Unloading Rate on Mechanical and Energy Characteristics of Coal-Rock Combinations

Pressure stimulated current in progressive failure process of combined coal-rock under uniaxial compression: Response and mechanism

Microcrack monitoring and fracture evolution of coal and rock using integrated acoustic emission and digital image correlation techniques

Failure Characteristics of Combined Coal-Rock with Different Interfacial Angles

Failure Characterization of Three Typical Coal-Bearing Formation Rocks Using Acoustic Emission Monitoring and X-ray Computed Tomography Techniques

Influence of coal-rock interface inclination on the damage and failure law of original coal-rock combination

Deformation and Failure Behaviour of Coal-Backfilling Composite Structure Under Double Shearing