Abstract:Fracture process of coal‐rock under three‐dimensional dynamic–static combined loading. Deep coal‐rock formations are subjected to complex stress environments characterized by high static stresses and dynamic disturbances. To study the damage, fracture, and energy evolution characteristics of coal‐rock under dynamic–static combined loading, a new multiscale constitutive model for coal‐rock under dynamic–static combined loading is proposed based on micromechanics, and it is implemented into the LS‐DYNA solver. A numerical model of coal‐rock Split Hopkinson Pressure Bar under dynamic–static combined loading is established using LS‐DYNA, and research on the mechanical and energy evolution characteristics of coal‐rock under one‐dimensional and three‐dimensional dynamic–static combined loading is conducted. The results show that under one‐dimensional dynamic–static combined loading, with the increase of precompression, the dynamic peak stress linearly decreases while the combined peak stress linearly increases, and the dissipated energy of the specimen shows a decreasing trend. The fracture patterns of the coal‐rock specimen include internal shear fracture and external tensile fracture, and eventually, these two modes of fracture intersect to form macroscopic mesh cracks. As the axial pressure increases, the degree of specimen fragmentation gradually increases. Under three‐dimensional dynamic–static combined loading, with the increase of preconfining pressure, the stress–strain curve of the specimen will transition from "stress drop" to "stress rebound" after the peak. The peak stress increases with the increase of confining pressure, and the energy dissipation density of the specimen increases first and then decreases with the increase of confining pressure. With the increase of confining pressure, the hoop deformation of the specimen plays a constraining role, and the degree of specimen fracture gradually weakens, and the time of fracture occurrence gradually delays. The research results contribute to revealing the mechanical and energy mechanisms of rockburst disasters in deep coal mines.

Modelling Heterogeneous Coal-Rock (HCR) Failure Patterns under Dynamic Impact Loads Using Image-Based Finite Element (FE) and Discrete Element (DE) Model

Image-based Numerical Study of Three-Dimensional Meso-Structure Effects on Damage and Failure of Heterogeneous Coal-Rock under Dynamic Impact Loads

Evaluating the impact of calcite and heterogeneity on the mechanical behavior of coal: A numerical study with grain-based finite-discrete element method

The Dynamic Response and Failure Model of Thin Plate Rock Mass under Impact Load

Experimental and numerical investigation on the mechanical characteristics and failure mechanism of cracked coal & rock-like combined sample under uniaxial compression

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Deformation, fracture, and energy evolution characteristics of coal‐rock under dynamic–static combined loading

Impact of coal microstructure on the development of failure process

Experimental and Numerical Modelling Investigation on Fracturing in Coal under Impact Loads

Effect of Primary/Artificial Interface on Dynamic Failure Behavior of Combined Coal and Rock: Monitoring by High-Speed Imaging and Scanning Electron Microscopy

Mechanical behaviors and failure characteristics of coal-rock combination under quasi-static and dynamic disturbance loading: a case based on a new equipment

Investigation of Multiscale Failure Mechanism of Red Bed Soft Rock Using Grain-Based Finite-Discrete Element Method Combined with X-Ray Micro-computerized Tomography

DDA Simulation Study on Mechanical Failure of Heterogenous Rock

A hybrid finite-discrete element method for modelling cracking processes in sandy mudstone containing a single edge-flaw under cyclic dynamic loading

Simulation Experimental Investigations into the Mechanical Response and Failure Mechanisms of Coal–Rock Combinations

Damage evolution of coal with a strong bursting liability and 3D measurement method for elastic deformation energy distribution

Study on Microcrack Propagation and Evolution of Fractured Coal-Rock Based on Mineral Particle Model

Analysis of Acoustic Emission Characteristics and Damage Constitutive Model of Coal-Rock Combined Body Based on Particle Flow Code

Tensile Failure Characteristics of Coal and Its 3D Cohesive Zone Model

X-ray Computed Tomography Images Based Phase-Field Modeling of Mesoscopic Failure in Concrete

Experimental and numerical simulation of loading rate effects on failure and strain energy characteristics of coal-rock composite samples