Abstract:Microwave-enhanced methane and nitrogen plasma is known to produce dense and highly active plasma species at atmospheric pressure. The main challenge in simultaneous production of ethylene and ammonia under plasma conditions is their low selectivity. This is largely due to the difficulties in controlling the reactions among the plasma-excited reactive intermediates. To address this challenge, we explored an innovative strategy - post-plasma catalysis outside a microwave-enhanced plasma zone (MWP). Experimentally, the post-plasma species, such as CHx, NHx, CN, and C2Hx, from a feed-gas mixture of methane, nitrogen and Argon were identified using an optical emission spectrometer. In the absence of a catalyst, but under plasma condition, methane and nitrogen could only convert to hydrogen cyanide, acetylene, and hydrogen. After placing the thermally heated Ag-Pd/CeO2 catalyst in the post plasma region, the selectivity of hydrogen cyanide was reduced by 9%, while the active nitrogen-based species simultaneously generated a steady amount of ammonia (selectivity=9%). The selectivity of ethylene increased from 3% to 37%, the highest among the C2 products. While under conventional thermal heating, in absence of plasma, the same catalyst over-hydrogenated the acetylene to ethane and no ammonia was produced from nitrogen. Theoretically, density functional theory calculations (DFT) determined that the post-plasma species-induced positive charge over the Pd-Ag catalytic surface which could enhance the energetics of forming ethylene but suppress the energetics of its further hydrogenation to ethane. Overall, this combined experimental and theoretical study advanced the fundamental understanding of the effects of post-plasma species on optimizing the selectivity in heterogeneous catalysis.

Plasma-Catalytic Ammonia Reforming of Methane over Cu-Based Catalysts for the Production of HCN and H 2 at Reduced Temperature

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Direct HCN synthesis via plasma-assisted conversion of methane and nitrogen

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Stable Cu/Cu2O/CuN3@NC Catalysts for Aqueous Phase Reforming of Methanol

Ammonia Decomposition over Low-loading Ruthenium Catalyst Achieved through "Adiabatic" Plasma Reactor

High-content graphitized N-doped carbon encapsulated Cu catalyst in aqueous phase reforming of methanol for efficient hydrogen production

Plasma‐promoted ammonia decomposition over supported ruthenium catalysts for COx‐free H2 production

Carbon dioxide reforming of methane over a novel Ni/Al2O3 catalysts

Reforming of ammonia and ammonia-air mixtures in a homogenous plasma reactor: Parametric study of hydrogen yields

A Bifunctional Catalyst for Green Ammonia Synthesis from Ubiquitous Air and Water

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Highly efficient ammonia synthesis at low temperature over a Ru–Co catalyst with dual atomically dispersed active centers

Post-plasma catalysis: Charge effect on product selectivity in conversion of methane and nitrogen plasma to ethylene and ammonia

Dielectric barrier discharge plasma-assisted catalytic ammonia synthesis: synergistic effect of Ni-MOF-74 catalyst and nanosecond pulsed plasma

Hydrogen Generation via Ammonia Decomposition on Highly Efficient and Stable Ru-free Catalysts: Approaching Complete Conversion at 450 oC

Plasma‐catalytic one‐step steam reforming of methane to methanol: Revealing the catalytic cycle on Cu/mordenite

Recent Understanding of Low-Temperature Copper Dynamics in Cu-Chabazite NH3-SCR Catalysts

Reaction Kinetics for Ammonia Synthesis using Ruthenium and Iron based Catalysts under Low Temperature and Pressure Conditions