Abstract:Supported by the controlling of crush‐sinter conditions, the homogeneous hereto LCO‐cathodes can be prepared, concentrated particle sizes, uniform distribution of doped elements, and stable crystal structure can be obtained. Interestingly, through tailoring introduction of Li/Co anti‐sites, the regenerated LiCoO2 delivered a considerable capacity retention of 88.86% after 500 cycles at 5.0 C, bringing about fascinated electrochemical performance and structural stability. Captured by relatively low energy consumption and harmful gas‐emission, direct regeneration has captured numerous attention, but still suffers from different particle sizes and diverse doping hetero‐elements, hardly meeting the market demand. Herein, assisted by the crush‐sinter regeneration from element to grain further to particle, homogenized recovery of hetero spent LiCoO2 is successfully carried out. More interestingly, after tailoring Li/Co anti‐sites ratio, the redox activity of Co‐ions is remarkably enhanced, effectively inhibiting the irreversible escape of O‐atoms under high voltage, bringing about the fascinating electrochemical performance and structural stability. As anticipated, the regenerated LiCoO2 delivered a considerable capacity of 175.2 mAh g−1 at 1.0 C, whilst its capacity retention can remain at 88.86% even after 500 cycles at 5.0 C, better than that of commercial materials. Assembling regenerated materials versus. graphite pouch cell, their considerable practical capacity retention can be kept at ≈91.4% even after 500 cycles. Supported by in situ XRD, electronic structure analysis, and detailed DFT calculations, the excellent high voltage stability of optimized samples mainly comes from the alleviating of phase conversion and oxygen redox. This work is expected to shed light on the potential value of homogenized regenerations, and offer effective strategies of upcycling about spent LCO.

Hybrid Surface Modification and Bulk Doping Enable Spent LiCoO2 Cathodes for High‐voltage Operation

Practical Surface-Reconstruction Strategy Based on Self-Reactive Interface Design Enables Ultralong Cyclability of Commercial Cathodes for Lithium-Ion Batteries

In Situ Constructed Spinel Layer Stabilized Upcycled LiCoO2 for High Performance Lithium‐Ion Batteries

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Homogenization and Upcycling of Hetero Spent LiCoO2 Cathodes: Rational Introduction of Li/Co Anti‐Sites Toward Enhanced High‐Voltage Stability

In Situ Surface Coating and Oxygen Vacancy Dual Strategy Endowing a Li-Rich Li 1.2 Mn 0.55 Ni 0.11 Co 0.14 O 2 Cathode with Superior Lithium Storage Performance

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

One‐Step Surface‐to‐Bulk Modification of High‐Voltage and Long‐Life LiCoO2 Cathode with Concentration Gradient Architecture

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Enabling Superior Electrochemical Performance of Lithium-Rich Li1.2Ni0.2Mn0.6O2 Cathode Materials by Surface Integration

Simultaneous Near‐Surface Trace Doping and Surface Modifications by Gas–Solid Reactions during One‐Pot Synthesis Enable Stable High‐Voltage Performance of LiCoO2

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

LiMgPO<sub>4</sub>-Coating-Induced Phosphate Shell and Bulk Mg-Doping Enables Stable Ultra-High-Voltage Cycling of LiCoO<sub>2</sub> Cathode

LiMgPO4‐Coating‐Induced Phosphate Shell and Bulk Mg‐Doping Enables Stable Ultra‐High‐Voltage Cycling of LiCoO2 Cathode

Surface Modification on Enhancing the High-Voltage Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Materials by Electrochemically Active LiVPO4F Hybrid

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

Direct Upcycling of Degraded LiCoO2 Material Toward High‐Performance Single‐Crystal NCM Cathode

Layered over-lithiated oxide coating for reviving spent LiCoO2 cathode for stable high-voltage lithium-ion battery

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes