Abstract:The effects of substrate temperature and O-2 flux on structural, electrical, and optical properties of the films prepared by RF reactive magnetron sputtering with SnF2-Sn target have been investigated by X-ray diffraction (XRD), Hall effect measurements, optical transmission spectra, and photoluminescence (PL) spectra. It is found that F-doped SnO films are produced and exhibit amorphous structure at lower O-2 fluxes for substrate temperature of RT-300 degrees C, and window of O2 flux for depositing the films is reduced as substrate temperature increases. F-doped SnO2 (FTO) films are formed at higher O-2 fluxes, and they exhibit amorphous state at substrate temperature of RT but crystalline state at substrate temperature of 150 and 300 degrees C. Furthermore, increasing O-2 flux or substrate temperature can promote crystallinity and affect growth orientation for crystalline FTO films. Highly conductive FTO films can be obtained only at suitable O-2 fluxes and higher substrate temperatures (150 and 300 degrees C), at which the films keep crystalline SnO2 structure along with high amount of oxygen vacancy (V-O). Increasing substrate temperature from 150 to 300 degrees C, the resistivity of FTO films cannot be further decreased due to the out-diffusion of F although the film crystallinity improves. Compared with F-doped SnO films, the average transmittance in visible light range and band gap (E-g) of FTO films obviously increase. The FTO films show similar shaped PL spectra that can be attributed to substitutional fluorine (F-O) and V-O defects in the films, and PL emission intensity increases with increasing O-2 flux or substrate temperature due to the improvement of film crystallinity. It is observed that the PL emission characteristics (shape and intensity) of F-doped SnO film are obviously different from FTO films and they have great changes as substrate temperature from RT to 150 degrees C, but corresponding mechanisms need to further clarify. (C) 2017 Elsevier B.V. All rights reserved.

Comparative study of RF sputtered Fe2O3- and Fe3O4-doped indium saving indium tin oxide thin films

Effect of Oxygen Flow Rate on Properties of Aluminum-Doped Indium-Saving Indium Tin Oxide (ITO) Thin Films Sputtered on Preheated Glass Substrates

Multilayer Fe3O4-doped ITO indium saving indium tin oxide thin films

Characterization of nanocrystalline indium tin oxide thin films prepared by ion beam sputter deposition method

Effect of RF Sputtering Power and Deposition Time on Optical and Electrical Properties of Indium Tin Oxide Thin Film

Characteristics of Indium Tin Oxide Films Deposited by DC and RF Magnetron Sputtering

Effect of Thickness on Structure and Optoelectrical Properties of Ti Doped Indium Tin Oxide Thin Films Deposited by RF Magnetron Sputtering

Optimization Method For Transparent Conducting Oxide Films Prepared By Dc Magnetron Sputtering

Properties of PET/ITO Thin Films Deposited by DC Magnetron Sputtering

Spectroscopic Investigations and Thermoelectric Properties of RF-Sputtered ITO Thin Films

Effects of the Variations of Oxide Structure on the Electrical and Optical Properties of ITO Films

Growth of Indium Tin Tantalum Oxides Films by Reactive Magnetron Sputtering

Electrical and optical properties of ITO thin films prepared by DC magnetron sputtering for low-emitting coatings

Influence of Process Parameters on Properties of Non-Reactive RF Magnetron-Sputtered Indium Tin Oxide Thin Films Used as Electrodes for Organic Light-Emitting Diodes

Effect of Oxygen Flow Rate on the Optical, Electrical, and Mechanical Properties of DC Sputtering ITO Thin Films

Structural, Electrical, and Optical Properties of F-doped SnO or SnO2 Films Prepared by RF Reactive Magnetron Sputtering at Different Substrate Temperatures and O2 Fluxes

Preparation and Characteristics of Nb-doped Indium Tin Oxide Thin Films by RF Magnetron Sputtering

High quality ITO thin films grown by dc and RF sputtering without oxygen

X-Ray Photoelectron Spectroscopy Studies Of Indium-Tin-Oxide Treated Via Oxygen Plasma Immersion Ion Implantation

Effects of processing parameters on crystalline structure and optoelectronic behavior of DC sputtered ITO thin film

The Effects Of Substrate Bias And Reactive Gas Partial-Pressure On The Resistivity Of Sputtered Ito Films