Abstract:Prussian blue analogues (PBAs)[1] with the general composition A 2 M[Fe(CN) 6 ] (A: alkali metal; M: Fe, Mn, etc) are an attractive positive electrode for potassium-ion batteries, owing to their chemical composition based on widely abundant materials, ease of synthesis, high electrochemical reversibility and higher average potential compared to its sodium congener [1]. The combination of a PBA electrode with a graphite negative electrode in a full cell configuration showed great promise as post-Li battery system. However, the upper cut-off potentials of K 2 Fe[Fe(CN) 6 ] and K 2 Mn[Fe(CN) 6 ] pose serious stability issues with respect to irreversible electrolyte degradation reactions. In addition, the electrolyte components have to be compatible with the potassium intercalation reaction at the graphite electrode[2], thus limiting the number of suitable electrolyte constituents. In this presentation, we discuss aspects of the material synthesis and electrolyte degradation processes at high potentials in liquid carbonate-based electrolytes. As we will be shown the choice of the precursors is paramount to arrive at suitable particle sizes and has a great impact on the electrochemical behavior of the material. Likewise, the density of Fe-vacancies strongly depends on the chosen synthesis and may lead to significant losses in the achievable discharge capacity. The electrode-electrolyte interface in half and full cell configurations was studied by in-house and synchrotron-based photoelectron spectroscopy (PES) for a detailed characterization of the surface layer and the oxidation states of iron in K 2 Fe[Fe(CN) 6 ] electrodes. This combined analysis of electrochemical and surface-sensitive analytical studies provides a general picture of the electrode degradation at high potentials and fosters the development of better electrolyte mixtures. Our results further show, how a deliberate choice of electrolyte components can help to reduce irreversible reactions and improve cycling stability and cycle life of potassium-ion batteries. For this we have recently expanded our activities also to solid polymer electrolytes, showing superior capacity retention to liquid electrolyte systems[3]. Figure 1. left: K 2 Fe[Fe(CN) 6 ] obtained using different Fe-precursors; right: capacity retention of PBA-K cells cycled in either a liquid (black) or solid polymer (red/purple) electrolyte. Reference s : [1] Kim et al., Trends Chem. 1 (2019) 682–692. [2] Allgayer et al., ACS Appl. Energy Mater. 5 (2022) 1136–1148. [3] Khudyshkina et al., ACS Appl. Polym. Mater. 4 (2022) 2734–2746. Figure 1

Electrochemical and transport properties of nickel hexacyanoferrate (KNi[Fe(CN) 6 ]) as potential cathode material for aqueous potassium-ion batteries

Understanding the Structural Evolution and Lattice Water Movement for Rhombohedral Nickel Hexacyanoferrate Upon Sodium Migration

Potassium Nickel Hexacyanoferrate As Cathode for High Voltage and Ultralong Life Potassium-Ion Batteries

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

The Role of Potassium Ions in Iron Hexacyanoferrate As a Cathode Material for Hybrid Ion Batteries

MnFe Prussian Blue Analogue-Derived P3-K0.5Mn0.67Fe0.33O1.95N0.05 Cathode Material for High-Performance Potassium-Ion Batteries

Incorporating Near‐pseudocapacitance Insertion Ni/Co‐based Hexacyanoferrate and Low‐cost Metallic Zn for Aqueous K‐ion batteries

The potassium energy storage behavior of Nickel-Znic co-doped Prussian blue analogs formed by a chelating agent assisted route and its application in a K+-proton hybrid ions aqueous alkaline Battery

Potassium ferrous ferricyanide nanoparticles as a high capacity and ultralong life cathode material for nonaqueous potassium-ion batteries

Potassium Prussian Blue Nanoparticles: A Low‐Cost Cathode Material for Potassium‐Ion Batteries

High-Entropy Prussian Blue Analogues as High-Capacity Cathode Material for Potassium Ion Batteries

A promising cathode material of sodium iron–nickel hexacyanoferrate for sodium ion batteries

Prussian Blue [K 2 FeFe(CN) 6 ]Doped with Nickel as a Superior Cathode: An Efficient Strategy ToEnhance Potassium Storage Performance

High-Voltage Potassium Hexacyanoferrate Cathode via High-Entropy and Potassium Incorporation for Stable Sodium-Ion Batteries

Highly Crystalline Prussian Blue for Kinetics Enhanced Potassium Storage

Whispers of Entropic Distortion Elevating Voltage and Electrochemical Depth in Potassium Hexacyanoferrate Cathodes

In Situ Fe‐Substituted Hexacyanoferrate for High‐Performance Aqueous Potassium Ion Batteries

Exploring the Role of Crystal Water in Potassium Manganese Hexacyanoferrate as a Cathode Material for Potassium-Ion Batteries

Prussian Blue Analogues for Potassium-Ion Batteries: Application of Complementary Operando X-Ray Techniques

Regulation of low-spin Fe of Mn-iron hexacyanoferrate for boosted potassium ion storage performance

(Invited) Degradation Processes at the Potassium Hexacyanoferrate Electrode in Potassium-Ion Batteries