Abstract:Aqueous zinc ion batteries (A-ZIBs) have been used as new alternative batteries for grid-scale electrochemical energy storage because of their low cost and environmental protection. Finding a suitable and economical cathode material, which is needed to achieve high energy density and long cycle stability, is one of the most important and arduous challenges at the present stage. Potassium manganese hexacyanoferrate (KMHCF) is a kind of Prussian blue analogue. It has the advantages of a large 3D frame structure that can accommodate the insertion/extraction of zinc ions, and is nontoxic, safe, and easy to prepare. However, regularly synthesized KMHCF has higher water and crystal defects, which reduce the possibility of zinc ions' insertion/extraction, and subsequently the discharge capacity and cycling stability. In this work, a KMHCF material with less water and low defects was obtained by adding polyvinylpyrrolidone during the synthesis process to control the reaction process. The KMHCF serves as the cathode of A-ZIBs and exhibits an excellent electrochemical performance providing a specific capacity of 140 mA h g–1 for the initial cycle at a current density of 100 mA g–1 (1 C). In particular, it can maintain a reversible capacity of 85 mA h g–1, even after 400 cycles at 1 C. Moreover, unlike the traditional zinc storage mechanism of A-ZIBs, we found that the KMHCF electrode undergoes a phase transition process when the KMHCF electrode was activated by a small current density, which is attributed to part of the Mn on the lattice site being replaced by Zn, thus forming a new stable phase to participate in the subsequent electrochemical reaction.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04129?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04129</a>.XRD patterns of KMHCF-80 and KMHCF-PVP-25; BET patterns of various KMHCF; cycling performance of KMHCF-PVP-80 electrode materials at 2 and 3 C; SEM and Nyquist patterns of various KMHCF electrodes after different cycles; charge and discharge curves and cycling performance at 1 C (first charge) of the KMHCF-PVP-80 electrode; CV curve of the KMHCF-PVP-80 electrode after the second cycle at a scan rate of 0.04 mV s–1; XRD comparison of the KMHCF-PVP-80 electrode after 230 cycles at 1 C; Raman patterns of the KMHCF-PVP-80 electrode sheets after different charge and discharge cycles; and elemental mapping images of KMHCF-PVP-80 electrodes after 230 cycles at 1 C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04129/suppl_file/am1c04129_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Incorporating Near‐pseudocapacitance Insertion Ni/Co‐based Hexacyanoferrate and Low‐cost Metallic Zn for Aqueous K‐ion batteries

Potassium Nickel Hexacyanoferrate As Cathode for High Voltage and Ultralong Life Potassium-Ion Batteries

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

Low defects potassium cobalt hexacyanoferrate as a superior cathode for aqueous potassium ion batteries

Ultra-fast and high-stable near-pseudocapacitance intercalation cathode for aqueous potassium-ion storage

Ordered Assembly of Potassium Cobalt Hexacyanoferrate Hollow Multivoid Nanocuboid Arrays for High-Performance Aqueous K-Ion Battery Towards All-Climate Energy Storages

In Situ Fe‐Substituted Hexacyanoferrate for High‐Performance Aqueous Potassium Ion Batteries

Cubic Manganese Potassium Hexacyanoferrate Regulated by Controlling of the Water and Defects as a High-Capacity and Stable Cathode Material for Rechargeable Aqueous Zinc-Ion Batteries

The potassium energy storage behavior of Nickel-Znic co-doped Prussian blue analogs formed by a chelating agent assisted route and its application in a K+-proton hybrid ions aqueous alkaline Battery

Pseudocapacitive Co‐Free Trimetallic Ni‐Zn‐Mn Perovskite Fluorides Enable Fast‐Rechargeable Zn‐Based Aqueous Batteries

Cobalt hexacyanoferrate enhanced by common ion effect for aqueous potassium-ion batteries

Potassium Prussian Blue Nanoparticles: A Low‐Cost Cathode Material for Potassium‐Ion Batteries

A Low‐Strain Potassium‐Rich Prussian Blue Analogue Cathode for High Power Potassium‐Ion Batteries

Potassium ferrous ferricyanide nanoparticles as a high capacity and ultralong life cathode material for nonaqueous potassium-ion batteries

Defect-free potassium manganese hexacyanoferrate cathode material for high-performance potassium-ion batteries

Layered P2‐Type K0.44Ni0.22Mn0.78O2 As a High‐Performance Cathode for Potassium‐Ion Batteries

Ultra-small ZnS enhanced by Fe-N-C for Advanced Potassium-Ion Hybrid Capacitors: Electronic Transfer Dynamics and Ion Adsorption Capability

Designing a Durable High-Rate K0.45Ni0.1Fe0.1Mn0.8O2 Cathode for K-ion Batteries: A Joint Study of Theory and Experiment

A Novel Charging-Optimized Cathode for Fast and High-Capacity Zinc-Ion Battery.

Sodium-Potassium Co-doped Layered Manganese Dioxide Cathode Material for High Performance Aqueous Zinc-Ion Batteries

Low-Cost K4 Fe(CN)6 As a High-Voltage Cathode for Potassium-Ion Batteries.