Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

Shaokun Chong,Jing Yang,Lan Sun,Shengwu Guo,Yongning Liu,Hua Kun Liu
DOI: https://doi.org/10.1021/acsnano.0c02047
IF: 17.1
2020-07-24
ACS Nano
Abstract:The abundant reserve and low price of potassium resources promote K-ion batteries (KIBs) becoming a promising alternative to Li-ion batteries, while the large ionic radius of K-ions creates a formidable challenge for developing suitable electrodes. Here Ni-substituted Prussian blue analogues (PBAs) are investigated comprehensively as cathodes for KIBs. The synthesized K<sub>1.90</sub>Ni<sub>0.5</sub>Fe<sub>0.5</sub>[Fe(CN)<sub>6</sub>]<sub>0.89</sub>·0.42H<sub>2</sub>O (KNFHCF-1/2) takes advantage of the merits of high capacity from electrochemically active Fe-ions, outstanding electrochemical kinetics induced by decreased band gap and K-ion diffusion activation energy, and admirable structure stability from inert Ni-ions. Therefore, a high first capacity of 81.6 mAh·g<sup>–1</sup> at 10 mA·g<sup>–1</sup>, an excellent rate property (53.4 mAh·g<sup>–1</sup> at 500 mA·g<sup>–1</sup>), and a long-term lifespan over 1000 cycles with the lowest fading rate of 0.0177% per cycle at 100 mA·g<sup>–1</sup> can be achieved for KNFHCF-1/2. The K-ion intercalation/deintercalation proceeds through a facile solid solution mechanism, allowing 1.5-electron transfer based on low- and high-spins Fe<sup>II</sup>/Fe<sup>III</sup> couples, which is verified by <i>ex situ</i> XRD, XPS, and DFT calculations. The K-ion full battery is also demonstrated using a graphite anode with a high energy density of 282.7 Wh·kg<sup>–1</sup>. This work may promote more studies on PBA electrodes and accelerate the development of KIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c02047?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c02047</a>.Additional ICP-AES and elemental analysis results, XPS spectra, XRD and detailed refinement results, CV and charge/discharge curves, operating voltage profiles, volume energy density curves, comparison of the cycling stability of published cathode electrodes for KIBs, <i>ex situ</i> XRD patterns, EIS profiles, DOS results and electron band structures, XRD and electrochemical performances of graphite anode, as well as the comparison of energy density of reported nonaqueous K-ion full cells (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c02047/suppl_file/nn0c02047_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
What problem does this paper attempt to address?
The paper primarily addresses the issues related to cathode materials in Potassium-ion batteries (KIBs), particularly the challenges posed by the large size of potassium ions. Specifically, the research team synthesized a material called Potassium Nickel Iron Hexacyanoferrate (KNFHCF-1/2) and conducted a comprehensive study on its performance as a high-energy-density, long-life cathode material for potassium-ion batteries. The advantages of this material include: 1. **High Capacity**: Thanks to the electrochemically active Fe-ions, KNFHCF-1/2 exhibits a relatively high initial capacity. 2. **Excellent Electrochemical Kinetics**: By reducing the band gap and the activation energy for potassium ion diffusion, the electrochemical reaction rate is improved. 3. **Structural Stability**: The inert Ni-ions help maintain the structural stability of the material. 4. **Long Cycle Life**: At a current density of 100 mA·g⁻¹, after 1000 cycles, the capacity decay rate is only 0.0177% per cycle, demonstrating excellent cycling stability. Additionally, through in-situ and ex-situ characterization techniques (such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), etc.), it was confirmed that potassium ions undergo reversible insertion/extraction through a simple solid-solution mechanism during charge and discharge processes. This further proves the material's stability and good electrochemical reversibility. This study not only provides new insights into the design of cathode materials for potassium-ion batteries but also demonstrates the great potential of this material for practical applications.