Abstract:Prussian blue analogues (PBAs)[1] with the general composition A 2 M[Fe(CN) 6 ] (A: alkali metal; M: Fe, Mn, etc) are an attractive positive electrode for potassium-ion batteries, owing to their chemical composition based on widely abundant materials, ease of synthesis, high electrochemical reversibility and higher average potential compared to its sodium congener [1]. The combination of a PBA electrode with a graphite negative electrode in a full cell configuration showed great promise as post-Li battery system. However, the upper cut-off potentials of K 2 Fe[Fe(CN) 6 ] and K 2 Mn[Fe(CN) 6 ] pose serious stability issues with respect to irreversible electrolyte degradation reactions. In addition, the electrolyte components have to be compatible with the potassium intercalation reaction at the graphite electrode[2], thus limiting the number of suitable electrolyte constituents. In this presentation, we discuss aspects of the material synthesis and electrolyte degradation processes at high potentials in liquid carbonate-based electrolytes. As we will be shown the choice of the precursors is paramount to arrive at suitable particle sizes and has a great impact on the electrochemical behavior of the material. Likewise, the density of Fe-vacancies strongly depends on the chosen synthesis and may lead to significant losses in the achievable discharge capacity. The electrode-electrolyte interface in half and full cell configurations was studied by in-house and synchrotron-based photoelectron spectroscopy (PES) for a detailed characterization of the surface layer and the oxidation states of iron in K 2 Fe[Fe(CN) 6 ] electrodes. This combined analysis of electrochemical and surface-sensitive analytical studies provides a general picture of the electrode degradation at high potentials and fosters the development of better electrolyte mixtures. Our results further show, how a deliberate choice of electrolyte components can help to reduce irreversible reactions and improve cycling stability and cycle life of potassium-ion batteries. For this we have recently expanded our activities also to solid polymer electrolytes, showing superior capacity retention to liquid electrolyte systems[3]. Figure 1. left: K 2 Fe[Fe(CN) 6 ] obtained using different Fe-precursors; right: capacity retention of PBA-K cells cycled in either a liquid (black) or solid polymer (red/purple) electrolyte. Reference s : [1] Kim et al., Trends Chem. 1 (2019) 682–692. [2] Allgayer et al., ACS Appl. Energy Mater. 5 (2022) 1136–1148. [3] Khudyshkina et al., ACS Appl. Polym. Mater. 4 (2022) 2734–2746. Figure 1

Highly Crystalline Prussian Blue for Kinetics Enhanced Potassium Storage

Structurally Stable, Low H2O Prussian Blue Analogs Toward High Performance Sodium Storage

Whispers of Entropic Distortion Elevating Voltage and Electrochemical Depth in Potassium Hexacyanoferrate Cathodes

Dual-salt assisted synergistic synthesis of Prussian white cathode towards high-capacity and long cycle potassium ion battery

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

Regulation of ferric iron vacancy for Prussian blue analogue cathode to realize high-performance potassium ion storage

Defect-Free Prussian Blue Analogue as Zero-Strain Cathode Material for High-Energy-Density Potassium-Ion Batteries

Synergistic Dual‐Additive Tailored Robust Interphase toward Enhanced Cyclability of Prussian Blue Cathode for K+ Storage

Cubic Prussian Blue Crystals from a Facile One-Step Synthesis As Positive Electrode Material for Superior Potassium-Ion Capacitors

(Invited) Degradation Processes at the Potassium Hexacyanoferrate Electrode in Potassium-Ion Batteries

A High‐Entropy Prussian Blue Analog for Aqueous Potassium‐Ion Batteries

Thermal Induced Conversion of CoFe Prussian Blue Analogs Nanocubes Wrapped by Doped Carbon Network Exhibiting Fast and Stable Potassium Ion Storage as Anode

Dual stabilization in potassium Prussian blue and cathode/electrolyte interface enables advanced potassium-ion full-cells

High-Voltage Potassium Hexacyanoferrate Cathode via High-Entropy and Potassium Incorporation for Stable Sodium-Ion Batteries

In Situ Fe‐Substituted Hexacyanoferrate for High‐Performance Aqueous Potassium Ion Batteries

Realizing Superior Prussian Blue Positive Electrode for Potassium Storage Via Ultrathin Nanosheet Assembly

Potassium Prussian Blue Nanoparticles: A Low‐Cost Cathode Material for Potassium‐Ion Batteries

MnFe Prussian Blue Analogue-Derived P3-K0.5Mn0.67Fe0.33O1.95N0.05 Cathode Material for High-Performance Potassium-Ion Batteries

Size Engineering and Crystallinity Control Enable High‐Capacity Aqueous Potassium‐Ion Storage of Prussian White Analogues

Highly Crystallized Prussian Blue with Enhanced Kinetics for Highly Efficient Sodium Storage

Hexacyanoferrate‐Type Prussian Blue Analogs: Principles and Advances Toward High‐Performance Sodium and Potassium Ion Batteries