Abstract:Prussian blue analogues (PBAs)[1] with the general composition A 2 M[Fe(CN) 6 ] (A: alkali metal; M: Fe, Mn, etc) are an attractive positive electrode for potassium-ion batteries, owing to their chemical composition based on widely abundant materials, ease of synthesis, high electrochemical reversibility and higher average potential compared to its sodium congener [1]. The combination of a PBA electrode with a graphite negative electrode in a full cell configuration showed great promise as post-Li battery system. However, the upper cut-off potentials of K 2 Fe[Fe(CN) 6 ] and K 2 Mn[Fe(CN) 6 ] pose serious stability issues with respect to irreversible electrolyte degradation reactions. In addition, the electrolyte components have to be compatible with the potassium intercalation reaction at the graphite electrode[2], thus limiting the number of suitable electrolyte constituents. In this presentation, we discuss aspects of the material synthesis and electrolyte degradation processes at high potentials in liquid carbonate-based electrolytes. As we will be shown the choice of the precursors is paramount to arrive at suitable particle sizes and has a great impact on the electrochemical behavior of the material. Likewise, the density of Fe-vacancies strongly depends on the chosen synthesis and may lead to significant losses in the achievable discharge capacity. The electrode-electrolyte interface in half and full cell configurations was studied by in-house and synchrotron-based photoelectron spectroscopy (PES) for a detailed characterization of the surface layer and the oxidation states of iron in K 2 Fe[Fe(CN) 6 ] electrodes. This combined analysis of electrochemical and surface-sensitive analytical studies provides a general picture of the electrode degradation at high potentials and fosters the development of better electrolyte mixtures. Our results further show, how a deliberate choice of electrolyte components can help to reduce irreversible reactions and improve cycling stability and cycle life of potassium-ion batteries. For this we have recently expanded our activities also to solid polymer electrolytes, showing superior capacity retention to liquid electrolyte systems[3]. Figure 1. left: K 2 Fe[Fe(CN) 6 ] obtained using different Fe-precursors; right: capacity retention of PBA-K cells cycled in either a liquid (black) or solid polymer (red/purple) electrolyte. Reference s : [1] Kim et al., Trends Chem. 1 (2019) 682–692. [2] Allgayer et al., ACS Appl. Energy Mater. 5 (2022) 1136–1148. [3] Khudyshkina et al., ACS Appl. Polym. Mater. 4 (2022) 2734–2746. Figure 1

A High‐Entropy Prussian Blue Analog for Aqueous Potassium‐Ion Batteries

High‐Entropy Prussian Blue Analogues Enable Lattice Respiration for Ultra‐Stable Aqueous Aluminum‐Ion Batteries

High-Entropy Prussian Blue Analogues as High-Capacity Cathode Material for Potassium Ion Batteries

Ordered Assembly of Potassium Cobalt Hexacyanoferrate Hollow Multivoid Nanocuboid Arrays for High-Performance Aqueous K-Ion Battery Towards All-Climate Energy Storages

The Rise of Prussian Blue Analogs: Challenges and Opportunities for High‐Performance Cathode Materials in Potassium‐Ion Batteries

Ultra‐Long Cycle of Prussian Blue Analogs Achieved by Equilibrium Electrolyte for Aqueous Sodium‐Ion Batteries

Whispers of Entropic Distortion Elevating Voltage and Electrochemical Depth in Potassium Hexacyanoferrate Cathodes

Highly Crystalline Prussian Blue for Kinetics Enhanced Potassium Storage

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

A Porous Network of Bismuth Used as the Anode Material for High‐Energy‐Density Potassium‐Ion Batteries

High rate and stable symmetric potassium ion batteries fabricated with flexible electrodes and solid-state electrolytes

Hollow Stair-Stepping Spherical High-Entropy Prussian Blue Analogue for High-Rate Sodium Ion Batteries

Wide-voltage-window Amphiphilic Supramolecule Excluded-Volume Electrolytes for Ultra-Durable Full-Cell Aqueous Potassium-Ion Batteries

Tunning solvation structure in non-flammable, localized high-concentration electrolytes with enhanced stability towards all aluminum substrate-based K batteries

Hydrated Bi‐Ti‐Bimetal Ethylene Glycol: A New High‐Capacity and Stable Anode Material for Potassium‐Ion Batteries

Potassium Prussian Blue Nanoparticles: A Low‐Cost Cathode Material for Potassium‐Ion Batteries

Synergistic Dual‐Additive Tailored Robust Interphase toward Enhanced Cyclability of Prussian Blue Cathode for K+ Storage

(Invited) Degradation Processes at the Potassium Hexacyanoferrate Electrode in Potassium-Ion Batteries

Nonflammable Phosphate‐Based Electrolyte for Safe and Stable Potassium Batteries Enabled by Optimized Solvation Effect

Realizing Superior Prussian Blue Positive Electrode for Potassium Storage Via Ultrathin Nanosheet Assembly

Highly‐solvating Electrolyte Enables Mechanically Stable and Inorganic‐rich Cathode Electrolyte Interphase for High‐performing Potassium‐ion Batteries