Cubic Manganese Potassium Hexacyanoferrate Regulated by Controlling of the Water and Defects as a High-Capacity and Stable Cathode Material for Rechargeable Aqueous Zinc-Ion Batteries

Tong Cao,Fan Zhang,Mojing Chen,Tong Shao,Zhi Li,Qunjie Xu,Danhong Cheng,Haimei Liu,Yongyao Xia
DOI: https://doi.org/10.1021/acsami.1c04129
2021-06-01
Abstract:Aqueous zinc ion batteries (A-ZIBs) have been used as new alternative batteries for grid-scale electrochemical energy storage because of their low cost and environmental protection. Finding a suitable and economical cathode material, which is needed to achieve high energy density and long cycle stability, is one of the most important and arduous challenges at the present stage. Potassium manganese hexacyanoferrate (KMHCF) is a kind of Prussian blue analogue. It has the advantages of a large 3D frame structure that can accommodate the insertion/extraction of zinc ions, and is nontoxic, safe, and easy to prepare. However, regularly synthesized KMHCF has higher water and crystal defects, which reduce the possibility of zinc ions' insertion/extraction, and subsequently the discharge capacity and cycling stability. In this work, a KMHCF material with less water and low defects was obtained by adding polyvinylpyrrolidone during the synthesis process to control the reaction process. The KMHCF serves as the cathode of A-ZIBs and exhibits an excellent electrochemical performance providing a specific capacity of 140 mA h g<sup>–1</sup> for the initial cycle at a current density of 100 mA g<sup>–1</sup> (1 C). In particular, it can maintain a reversible capacity of 85 mA h g<sup>–1</sup>, even after 400 cycles at 1 C. Moreover, unlike the traditional zinc storage mechanism of A-ZIBs, we found that the KMHCF electrode undergoes a phase transition process when the KMHCF electrode was activated by a small current density, which is attributed to part of the Mn on the lattice site being replaced by Zn, thus forming a new stable phase to participate in the subsequent electrochemical reaction.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04129?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04129</a>.XRD patterns of KMHCF-80 and KMHCF-PVP-25; BET patterns of various KMHCF; cycling performance of KMHCF-PVP-80 electrode materials at 2 and 3 C; SEM and Nyquist patterns of various KMHCF electrodes after different cycles; charge and discharge curves and cycling performance at 1 C (first charge) of the KMHCF-PVP-80 electrode; CV curve of the KMHCF-PVP-80 electrode after the second cycle at a scan rate of 0.04 mV s<sup>–1</sup>; XRD comparison of the KMHCF-PVP-80 electrode after 230 cycles at 1 C; Raman patterns of the KMHCF-PVP-80 electrode sheets after different charge and discharge cycles; and elemental mapping images of KMHCF-PVP-80 electrodes after 230 cycles at 1 C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04129/suppl_file/am1c04129_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?