Abstract:In this paper, a novel point grinding wheel (NPGW) with coarse grinding area angle θ is proposed. According to earlier studies, this type of grinding wheel has the advantages of high grinding efficiency, a long service life, and very little surface roughness generated. The contact zone between the grinding wheel and workpiece is modified by the addition of the NPGW with the coarse grinding area angle θ and the inclining angle α of the point grinding process, and as a result, the grinding zone temperature is also altered. Using the finite element method, the grinding zone temperature can be simulated based on the theory of grinding heat generation and distribution, and the triangular heat source distribution model. From this, the distribution of the point grinding temperature field and influence of different grinding parameters on the grinding zone temperature were obtained. To verify the simulation, thermocouple measurements for different NPGWs were taken during the grinding experiments. The simulation provides an auxiliary and predictive method for the actual process. Moreover, an L16(45) orthogonal experiment was designed. Analyzing this range, primary and secondary factors affecting grinding zone temperature, and the optimum combination of parameters for reducing the grinding zone temperature, are determined. Finally, the grinding heat can affect the quality of the workpiece subsurface; therefore, the influence of the various parameters on subsurface quality, including metallographic structure, work hardening, and residual stress, was studied. In conclusion, the NPGW and point grinding process can reduce the degree of work hardening and residual stress of the subsurface of the workpiece, and it was demonstrated that the residual stress changes from compressive to tensile with increasing depth.

Investigation of the contact temperature during face grinding with a new design wheel in order to increase its efficiency

Research on the Analytical Thermal Model in Surface Grinding by Cup Wheel

Validation of an analytical model for grinding temperatures in surface grinding by cup wheel with numerical and experimental results

Investigation of the Grinding Wheel Air Boundary Layer Flow

Investigation of the grinding temperature and subsurface quality of a novel point grinding wheel

Research on Enhancing Heat Transfer in Grinding Contact Zone with Radial Water Jet Impinging Cooling

Investigation of Cutting Mechanism and Residual Stress State with Grooved Grinding Wheels

Temperature Investigation of Coated Workpieces in Intermittent Grinding with a Cup Wheel

Development of In-Process Temperature Measurement of Grinding Surface with an Infrared Thermometer

Analytical and Experimental Investigation of Temperature in Form Grinding

Modeling and Simulation of Temperature Field in High-Shear and Low-Pressure Grinding with Liquid-Body-armor-like Grinding Wheel

Studies on Exploiting Further the Potential of High Efficiency Grinding

Grinding Performance Evaluation of 3D-Printed Porous Metal-Bonded Grinding Wheel in BK7 Glass Grinding

Design of Robust Grinding Wheel Reciprocating Arrangement for Precision Point-Grinding Machining

Investigation on Grinding Temperature and Heat Flux Distribution with Grooved Grinding Wheels

Experimental Study on Ultrasonic Vibration-Assisted Grinding of Hardened Steel Using White Corundum Wheel

Temperature-based method for determination of feed increments in crankshaft grinding

Numerical modeling of heat flux in ultrasonic-assisted grinding of difficult-to-cut materials with a pressurized lubrication system

Study on Temperature of WC-Co Coat in Interminttent Grinding with Cup Wheel

Heat flux distribution model and transient temperature field analysis in grinding of helical raceway

Optimal Design and Performance Evaluation of Grinding Wheels with Triply Periodic Minimal Surface Lattice Structure