Abstract:Poly(lactic acid) (PLA) was an eco‐friendly and biodegradable material. However, its molecular chain was inflexible and showed limited toughness. In this work, PLA was modified with epoxy‐terminated hyperbranched polymer (EHBP) by melt blending to improve the toughness of PLA. The results showed that epoxy groups within EHBP reacted with carboxyl and hydroxyl groups of PLA, forming chemical micro‐crosslinking. In addition, intermolecular hydrogen bonds were formed between hydroxyl groups on EHBP and PLA, and the combined action of the two ultimately improved the toughness and strength of PLA. Chemical micro‐crosslinking was validated via Fourier transform infrared spectroscopy (FTIR) and gel content analysis. By observing the microscopic morphology of the impact fracture of the blends, it was found that the interface adhesion of the blends increased with the addition of EHBP, enhancing the corresponding mechanical properties. The best interface adhesion was achieved when 2.5 phr EHBP was added to PLA. At this point, compared with neat PLA, the maximum tensile strength, impact strength, elongation at break, and flexural modulus of PLA/EHBP increased by 17.4%, 54.5%, 107.1%, and 25.8% respectively, achieving the goal of simultaneously enhancing the toughness and strength of PLA. The simultaneous improvement in the strength and toughness of PLA expands its potential application value. Poly(lactic acid) (PLA) is an eco‐friendly and biodegradable material. However, its molecular chain was rigid and showed limited toughness. In this work, PLA was modified with epoxy‐terminated hyperbranched polymer (EHBP) by melt blending to improve the toughness. The results showed that epoxy groups within EHBP reacted with carboxyl and hydroxyl groups of PLA, forming chemical micro‐crosslinking. In addition, intermolecular hydrogen bonds were also formed between EHBP and PLA. The combined action of the above two aspects ultimately improved the toughness and strength of PLA. The mechanical property tests results showed that the mechanical properties of PLA improved best when 2.5 phr of EHBP was added. At this point, compared with neat PLA, the maximum tensile strength, impact strength, elongation at break, and flexural modulus of PLA/EHBP increased by 17.4%, 54.5%, 107.1%, and 25.8%, respectively, compared to those of neat PLA. It achieves the goal of simultaneously enhancing the toughness and strength of PLA and subsequently expands its potential application applications.

Upgrading the properties of polylactic acid/luffa fiber biocomposites through the addition of maleic anhydride grafted styrene–ethylene–butylene–styrene impact modifier

Preparation and Characterization of Maleic Anhydride Compatibilized Poly(lactic acid)/Bamboo Particles Biocomposites

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Tailoring interfacial adhesion and mechanical performance of biocomposites based on poly(lactic acid)/rice straw by using maleic anhydride through reactive extrusion process

Study on properties of polylactic acid/lemongrass fiber biocomposites prepared by fused deposition modeling

Synergistic modification of polylactic acid by oxidized straw fibers and degradable elastomers: A green composite with good strength and toughness

Effect of oligomers from epoxidized soybean oil and sebacic acid on the toughness of polylactic acid /bamboo fiber composites

Compatibilizing Effects of Maleated Poly(Lactic Acid) (pla) on Properties of Pla/Soy Protein Composites

Assessment of mechanical properties and morphology of polylactic acid/acrylonitrile butadiene styrene blends and their carbon fabric-reinforced composites

Polylactide Toughening with Epoxy‐functionalized Grafted Acrylonitrile–butadiene–styrene Particles

Tuning the mechanical and thermomechanical properties through the combined effect of crosslinking and annealing in poly(lactic acid)/acrylonitrile‐EPDM‐styrene blends

Synergistic toughening and reinforcement of poly(lactic acid) with epoxy‐terminated hyperbranched polymers

A reactive compatibilization with the compound containing four epoxy groups for polylactic acid/poly(butylene adipate-co-terephthalate)/thermoplastic starch ternary bio-composites

Enhancing the mechanical properties of polylactic acid (PLA) composite films using Pueraria lobata root microcrystalline cellulose

Enhanced Mechanical Properties of Polylactic Acid/Poly(Butylene Adipate-co-Terephthalate) Modified with Maleic Anhydride

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Effect of Different Compatibilizers on the Properties of Poly (Lactic Acid)/Poly (Butylene Adipate-Co-Terephthalate) Blends Prepared under Intense Shear Flow Field

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid)

Effects of Chitosan Nanoparticles and 4,4′ Methylene-Diphenyl Diisocyanate on the Polylactic Acid/Poly (Butyleneadipate-Co-Terephthalate) Composite Properties

Preparation and characterization of maleic anhydride‐based double‐monomer grafted polylactic acid compatibilizer

Blends of rABS and SEBS: Influence of In-Situ Compatibilization on the Mechanical Properties