Abstract:Selective catalytic reduction (SCR) reduces oxynitrides from power plant and vehicle emissions, and enhancements in efficiency would lessen pollution further. We prepared a series of transition metal (TM) doped CeO2 catalysts by impregnating them with vermiculite (VMT) as a carrier for reducing NOx by SCR with carbon monoxide (CO–SCR). The catalyst performance was in the following order: Zn < Cr < Fe < no dopant < Mn < Ni < Co < Cu. In other words, Mn, Ni, Co, and Cu greatly promoted NO conversion compared with Ce/VMT alone, whereas Zn, Cr, and Fe dopants hindered NO conversion. We applied density functional theory (DFT) by structural optimization and potential configuration analyses of CeO2 (1 1 1) and TM–CeO2 (1 1 1), which enabled us to propose the reaction pathway and the potential energy distribution of the transition state. Our DFT analyses are in accordance with the sequence of the NO + CO reaction. The performance of the Cu catalyst was superior to the others. The CeO2 (1 1 1) lattice plane is primarily in the cerium species, whereas the Cu–O–Ce interface forms in two phases, which indicates a complex interplay between the copper and cerium. Furthermore, the catalyst has numerous surface oxygen vacancies (Ovs) and active *O species, and exhibits an impressive reduction capacity: the NO conversion reaches 100% with a gas hourly space velocity of 102,000 h−1 at 300 °C. The CO–SCR reaction pathway on the Cu–CeO2 (1 1 1) surface is as follows: R1: CO + Olattice → Ov; R2: 2NO → *ONNO → N2O + *O; R3: N2O → N2 + *O; R4: *O + CO → CO2; R5: *O + Ov → Olattice. The synergy of the dopants on the CeO2 (1 1 1) surface modulated the distribution of active centers in the catalyst, which in turn modulated the catalyst performance. Our research will be useful for flue gas remediation.

CuCeOx/VMT powder and monolithic catalyst for CO-selective catalytic reduction of NO with CO

Transition-metal‐doped ceria carried on two-dimensional vermiculite for selective catalytic reduction of NO with CO: Experiments and density functional theory

Bifunctional catalysts V-Cu/TiO 2 for selective catalytic reduction of NO x and CO oxidation under oxygen-rich conditions

Hollow Mn-doped CeO2@Co3O4 catalyst for NO reduction by CO

Selective catalytic reduction of nitric oxide with carbon monoxide over alumina-pellet-supported catalysts in the presence of excess oxygen

VxMn(4-x)Mo3Ce3/Ti catalysts for selective catalytic reduction of NO by NH3

Crystal facet-modulated CuO/CeO 2 catalysts for highly selective catalytic reduction of NO by CO

Surface Tailoring on Bifunctional CuOx/MnO2 Catalyst to Promote the Selective Catalytic Reduction of NO with NH3 and Oxidation of CO with O2

Bifunctional Mn-Cu-CeOx/γ-Al2O3 catalysts for low-temperature simultaneous removal of NOx and CO

Three-Dimensional Spherical CuCoAlO<sub>X</sub> Catalyst with a Micro-/ Nanoporous Structure for Low-Temperature CO-SCR Denitration

Three-Dimensional Spherical CuCoAlO<sub><i>x</i></sub> Catalyst with a Micro-/Nanoporous Structure for Low-Temperature CO-SCR Denitration

Novel V 2 O 5 –CeO 2 /TiO 2 catalyst with low vanadium loading for the selective catalytic reduction of NO x by NH 3

Flexible monolithic Pt/CuO-Fe2O3/TiO2 catalysts integrated on Ti mesh for efficient NO removal via CO-SCR reaction

The deposition of VWO x on the CuCeO y microflower for the selective catalytic reduction of NO x with NH 3 at low temperatures.

Nickel foam supported CuCe mixed metal oxide as monolith catalyst for NO removal

FeVO4-supported Mn-Ce Oxides for the Low-Temperature Selective Catalytic Reduction of NOx by NH3

Highly efficient MnCe/Ti catalyst for NH 3 -SCR of NO from sintering flue gas at low temperature: CO tolerance and reaction mechanism assessed by in situ DRIFTS

Highly Efficient Mesoporous V2O5/WO3–TiO2 Catalyst for Selective Catalytic Reduction of NOx: Effect of the Valence of V on the Catalytic Performance

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Comparative study of MCe0.75Zr0.25Oy (M = Cu, Mn, Fe) catalysts for selective reduction of NO by CO: Activity and reaction pathways

Copper-based catalysts supported on novel Metal-Organic Framework MIL-125(Ti) for selective catalytic reduction of NO with CO