Abstract:A major bottleneck hindering the performance and commercial application of cost-effective carbon-based perovskite solar cells (C-PSCs) is the contact issue at the interface of the perovskite layer and the carbon counter electrode. Herein, a new approach of intermediate-controlled interfacial engineering (IIE) utilizing an ultra-low-cost acetylene black material is developed for the first time that can improve the interfacial contact of C-PSCs. We achieved both high efficiency (16.41%) without hole-transport materials and good stability as a result of the optimal heterogeneous interfacial contact. Devices without any encapsulation consistently exhibit excellent environmental stability, retaining 93% of their original efficiency by storing in an ambient atmosphere (30 °C, 30% RH) for 2000 h and achieving 81% of their original efficiency by storing in a terrible air environment (85 °C, 65% RH) for 312 h. In addition, to acquire a deep understanding of carrier transport, a comparison of heterogeneous interfaces fabricated using different methods has been undertaken. In C-PSCs fabricated by the IIE method, the lower radioactive recombination and faster carrier transfer result in a shorter carrier lifetime. We present a promising future for the industrialization of C-PSCs by reducing the costs and improving the performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11419?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11419</a>.XRD patterns of the PVK films; box charts of PSCs including Voc, FF, Jsc, and PCE; MH and FWHM of the PVK films; cross-sectional SEM image of the IIE-PSCs; J–V curves of the C-PSCs fabricated using the IIE method measured under reverse and forward scans; schematic and energy level diagram of the as-prepared IIE-PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11419/suppl_file/am0c11419_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cellulose‐Based Oxygen‐Rich Activated Carbon for Printable Mesoscopic Perovskite Solar Cells

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Enhanced‐Performance Electrodes from Biomass‐Derived Carbon (Rice Husk) for Printable Perovskite Solar Cells

Interfacial Post-Treatment for Enhancing the Performance of Printable Carbon-Based Perovskite Solar Cells

Carbon Quantum Dot Additive Engineering for Efficient and Stable Carbon-Based Perovskite Solar Cells

Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells via a Multifunctional Fluorinated Molecule

Self‐Encapsulable Carbon Electrode for Efficient and Stable Perovskite Solar Cells

Efficient Carbon‐based Perovskite Solar Cells Passivated by Alkylammonium Chloride

Room‐Temperature‐Processed, Carbon‐Based Fully Printed Mesoscopic Perovskite Solar Cells with 15% Efficiency

Comparison of interfacial bridging carbon materials for effective carbon-based perovskite solar cells

All Electrospray Printing of Carbon‐Based Cost‐Effective Perovskite Solar Cells

All-Inorganic Perovskite Solar Cells with Tetrabutylammonium Acetate as the Buffer Layer between the SnO 2 Electron Transport Film and CsPbI 3

Application of Carbon Materials in Conductive Electrodes for Perovskite Solar Cells

Biomass Derived Self‐Doped Carbon Nanosheets Enable Robust Hole Transport Layers with Ion Buffer for Perovskite Solar Cells

Interface optimization of hole-conductor free perovskite solar cells using porous carbon materials derived from biomass soybean dregs as a cathode

Intermediate-Controlled Interfacial Engineering for Stable and Highly Efficient Carbon-Based PSCs

High-efficiency (>20%) planar carbon-based perovskite solar cells through device configuration engineering

Mechanical Compression Enabled Carbon‐Based Perovskite Solar Cells with Enhanced Efficiency and Stability

Efficient, stable, and fully printed carbon-electrode perovskite solar cells enabled by hole-transporting bilayers

High Permeable Microporous Structured Carbon Counter Electrode Assisted by Polystyrene Sphere for Fully Printable Perovskite Solar Cells

Low Temperature Processed Fully Printed Efficient Planar Structure Carbon Electrode Perovskite Solar Cells and Modules