Abstract:With the development of ultra-precision machining technology, parts with microstructures on the surface are playing an increasingly important role in engineering practice. The scanning interference microscope measurement method is widely used in the measurement of microscopic surface topography. This paper proposes a method of interference microscopy combined with subaperture stitching. The first step is to divide and measure the sub-aperture. There is a partial overlap area between the divided adjacent subapertures. The white light interferometer measures each sub-aperture in turn. The second step is edge feature detection. There are highly steep edge features between the bottom of the groove and the surface of the surface microgroove. The stitching algorithm detects edge features by detecting the slope threshold of the sub-aperture. The third step is to correct the abscissa. Project the detected edge feature data onto the OXY plane to generate a 2D data set. The multi-dimensional motion scanning platform inevitably has motion errors in the measurement process, so the edge characteristic curves of adjacent sub-apertures have obvious lateral displacement in the overlapping area. The lateral displacement and angle of the lateral coordinate of each sub-aperture are corrected by the least square method. The fourth step is the height coordinate correction. The stitching algorithm minimizes the height difference between the corresponding points in the overlapping area, and solves it with a linear least squares problem model. We have completed the measurement of the fringe pattern on the computer-generated hologram (CGH) substrate and the complete topography of the long groove on the 10mm hemisphere. After the sub-aperture global iterative stitching algorithm, there is no stitching trace in the simulation result. For the long groove on the hemisphere, we designed a four-dimensional scanning motion platform and a special fixture to ensure that the long groove on the hemisphere rotates around an axis perpendicular to the geodesic line. The center of the white light interference fringe is always at the center of the long slot aperture.

High-efficiency sub-microscale uncertainty measurement method using pattern recognition

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

High-accuracy Three-dimensional Measurement by Improving the Asymmetry of Dithered Patterns

End-to-end Pattern Optimization Technology for 3D Shape Measurement.

A Measurement System for the Roughness of Ultra Smooth Surface with Large Aperture

Uncertainty Analysis of Slot Die Coater Gap Width Measurement by Using A Shear Mode Micro-Probing System

Error Separation Method For Precision Measurement Of The Run-Out Of A Microdrill Bit By Using A Laser Scan Micrometer Measurement System

Measurement of tiny-size clearance based on CCD image measurement

High-Precision Measurement of Microscales Based on Optoelectronics and Image Integration Method

Modeling and Analysis of Uncertainty in On-Machine Form Characterization of Diamond-Machined Optical Micro-Structured Surfaces

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Nanoscale measurement with pattern recognition of an ultra-precision diamond machined polar microstructure

Study on Data Processing Method of High Precision Micro-tensile Stage

High accuracy measurement technology of CCD and its industrial application

Area CCD-Based High Accuracy Measurement Technology and Its Application

Design of High Precision Image Measurement System for Small Workpiece

Precision Patterning Sub-Nanometrology Relied Up Pico-Meter Quantum Sensing Approach

High-resolution white light scanning stitching measurement of full-surface microstructure

A Study of Measurement Technology for Ultra-Precision Freeform Surfaces

Development of an on-machine measurement system for ultra-precision machine tools using a chromatic confocal sensor

On-machine measurement method and geometrical error analysis in a multi-step processing system of an ultra-precision complex spherical surface