Abstract:A large campaign of characterization of the ductile to brittle transition temperature (DBTT) and microstructure has been performed on several commercial and lab-scale pure tungsten grades, potassium doped tungsten alloys, and particle reinforced tungsten grades (with particles of TiC, Y2O3, or ZrC), all integrated in a large-scale neutron irradiation campaign. The DBTT is deduced based on miniaturized three-point bending tests to provide reference data for the assessment of the irradiation effects on the tungsten alloys. This miniaturized geometry is designed to minimize the operational cost of neutron irradiation, to speed up post-irradiation examination, and to reduce the amount of nuclear waste. The resulting DBTT ranges from around −15 up to 450 °C, depending on the material. The potassium doped tungsten alloys have the lowest DBTT, followed by rolled ZrC reinforced tungsten grade, commercial pure tungsten grades, lab-scale pure tungsten grades, and other particle reinforced tungsten grades. The crack plane orientation and microstructure with respect to grain shape and grain boundaries significantly affect the DBTT for forged/rolled tungsten products with elongated grains. The L-T orientation has a lower DBTT compared to the T-L orientation. Moreover, the DBTT difference in the L-T and T-L orientation raises with increasing the grain aspect ratio. An attempt is made to establish a relationship between the density of low and high angle grain boundaries and DBTT value. The obtained relationship is discussed in the frame of mechanical processing (i.e., rolling or forging) to optimize the DBTT by optimized manufacturing. The results are compared to recent computational predictions of the DBTT in tungsten.

Study of estimation of ductile-brittle transition temperature using U-notched small punch test specimens

Assessment of Toughness in Long Term Service Crmo Low Alloy Steel by Fracture Toughness and Small Punch Test

Bonding Properties Evaluation for an EBW Joint of RAFM Steel by Using Notched Small Tensile Specimens

Assessment of Fracture Toughness Using Small Punch Tests of Prenotched Specimens

Ductile to brittle transition temperature of advanced tungsten alloys for nuclear fusion applications deduced by miniaturized three-point bending tests

Mechanism of Brittle-to-ductile Transition in Tungsten under Small-Punch Testing

Effect of Anisotropic Mechanism of W-2%wt Y2O3 Alloy on DBTT and Fracture Analysis under Small Punch Testing

Fracture toughness estimation of ductile materials using a modified energy method of the small punch test

Small Punch Test of U-Shaped Notch of Tc4 Titanium Alloy and Its Numerical Simulation

Effects of notch width and loading rate on the dynamic mode II fracture toughness of Ti-6Al-4V

Effects of Creep Ductility and Notch Constraint on Creep Fracture Behavior in Notched Bar Specimens

Extraction of Fracture Toughness Parameters by Ring-Notched Small Punch Specimen Using Cohesive Model

Study on Influence Factors of Small Punch Test Based on Ductile Damage Numerical Analysis

Measurement of Ductile-Brittle Transition Temperature of Tungsten Materials by Four-Point Bending Method and Its Comparison with Other Methods

Sensitivity Analysis of Notch Shape on Brittle Failure by Using Uni-Bond Dual-Parameter Peridynamics

Determination of Ductile Damage Parameters by Notched Plate Tensile Test Using Image Analysis

Finite element analysis of equivalent fracture stress and strain in small punch specimen

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel

Assessment of notch fatigue and size effect using stress field intensity approach

Pre-notched dog bone small punch specimens for the estimation of fracture properties

In-depth Analysis of Notched 3-P-b Concrete Fracture