Abstract:In this paper, line-and ring-notched small punch test (SPT) specimens were studied; a three-dimensional (3D) model of a ring-notched SPT specimen was established using the contour integral method, and the validity of the model was verified using ring-notched specimens. The stress and strain fields were analyzed using numerical simulations of a ring-notched SPT specimen, and the change in the stress gradient during deformation was considered. To verify the finite element model, the results of the numerical simulations were compared with those of three-point bending tests and a Gurson-Tvergaard-Needleman (GTN) model. Compared with the line-notched specimen, the ring-notched specimen was more suitable for notch propagation analysis and fracture toughness evaluation. The results of the numerical simulations were in good agreement with those of the experiments, which showed that the numerical model used in this study was correct. For a notch that initiated when the load reached its maximum value, the value of the J integral was 335 x 10(-6) kJ/mm(2), and at time 0.85Pmax, the value of the J integral was 201 x 10(-6) kJ/mm(2), and the difference from the result of the three-point bending test was 14.4%. For a notch that initiated during the stretching deformation stage, the relevant fracture toughness was 225 x 10(-6) kJ/mm(2), and the difference from the result of the three-point bending test was 3%.

Fracture toughness estimation of ductile materials using a modified energy method of the small punch test

Assessment of Toughness in Long Term Service Crmo Low Alloy Steel by Fracture Toughness and Small Punch Test

Small Punch Testing for Assessing the Fracture Properties of the Reactor Vessel Steel with Different Thicknesses

SMALL PUNCH TEST ASSESSMENT FOR THE EFFECT OF THICKNESS N THE FRACTURE TOUGHNESS OF THE SMALL SPECIMENS

Finite element analysis of equivalent fracture stress and strain in small punch specimen

Study on Influence Factors of Small Punch Test Based on Ductile Damage Numerical Analysis

Study on yield strength of Q345R by energy method of small punch test

Thickness effect on the ductile fracture properties of the vessel steel with small punch testing techniques

Improved approaches for small punch test to estimate the yield and ultimate tensile strength of metallic materials

A new method to estimate the plane strain fracture toughness of materials

SMALL PUNCH TEST FOR DETERMINING THE MATERIAL PROPERTIES OF Cr-Mo STEEL AFTER LONG-TERM SERVE AT HIGH TEMPERATURE

A new small punch test method to predict tensile properties of steels: Representative stress–strain method

SMALL PUNCH TEST FOR THICKNESS EFFECT ON FRACTURE TOUGHNESS OF FERRIC STEELS

Elastic and Plastic Deformation Behavior Analysis in Small Punch Test for Mechanical Properties Evaluation

An energy-based model for prediction of fracture toughness using Charpy size 'surveillance specimens' in nuclear power plant

Investigation on the Tensile Properties of Inconel 625 Using Small Punch Test

Yield Strength Analysis by Small Punch Test Using Inverse Finite Element Method

Mechanical Properties Study of Miniature Steel Specimens Based on the Small Punch Test and Simulation Methods

Assessment of Fracture Toughness Using Small Punch Tests of Prenotched Specimens

Study on Mechanical Properties of S30403 Based on Small Punch Test Technique at Elevated Temperature

A modified small punch testing scheme to investigate the circumferential mechanical behavior of nuclear fuel cladding tubes