Abstract:This study provides investigations on whether the fracture toughness can be accurately predicted from mini-sized uniaxial tensile specimens with existing global and local approaches. The critical toughness model, based on classical fracture mechanics, and the energy release rate (ERR) model, based on damage mechanics, were used as the two representative global approaches. While the finite element simulated compact tension (CT) specimen implemented with Gurson-Tvergaard-Needleman model was used as the local approach. Specimen size effect was judged through the viewpoints of stress–strain relationship and damage development. It was proved that the specimen size has no significant influence on stress–strain relationship, and has little influence on damage developments when the thickness reaches 1.0 mm. Fracture toughness predictions were conducted on four metals, including two steels (SA508Gr.3Cl.1 and 18MnMoNbR), one aluminum alloy (6061-T651), and one titanium alloy (TC4). For TC4 exhibiting brittle cleavage features on the fracture surface of CT specimens, neither the global nor the local approach can accurately predict its fracture toughness. For 6061-T651 exhibiting both ductile and brittle features on the fracture surface of CT specimens, there exists significant macroscopic crack propagation at the moment of conventional fracture toughness determination. The existence of significant macroscopic crack is inconsistent with the "equivalent crack" assumption in the ERR model, leading to a failure in its fracture toughness prediction. For two steels following the "equivalent crack" assumption, the ERR model and the local approach yield more accurate predictions (with the maximum error around 10 %) than their critical toughness counterpart (with the maximum error around 30 %).

A new method to estimate the plane strain fracture toughness of materials

The Minimum Energy Density Criterion for the Competition between Shear and Flat Fracture

Fracture toughness estimation of ductile materials using a modified energy method of the small punch test

An investigation on fracture toughness predictions from mini-sized uniaxial tensile specimens with global and local approaches

Predicting Fracture Behavior of Quasi-Brittle Materials Using Quantitatively Varied Geometric Specimens: A Design Method

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

A New Approach to Evaluate Fracture Toughness of Structural Materials

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel

A new technique to measure the dynamic fracture toughness of solids

An experimental investigation on predicting the fracture toughness distributions in ferritic-austenitic stainless steel dissimilar metal welds from spherical indentation tests

Measurement uncertainty of plane-strain fracture toughness KIC testing by the Monte Carlo Method

Statistical characterization of specimen size and temperature dependence of cleavage fracture toughness of ferritic steels

New Constraint Parameters Based on Crack Tip Plastic Zone: Theoretical Derivations and Effectiveness Verification

Type I Fracture Toughness Test of Rock-like Materials Based on the Particle Flow Method

A comparative study on characterizing the fracture toughness variations in thick-wall hydrogenation reactor welded joint by spherical indentation tests

Estimation of Fracture Toughness with Small Specimens Based on TSM Model

The influence of friction on the determination of rock fracture toughness

Prediction of Fracture Toughness of Thin Films by Quasi-continuum Method

A Practical Interpolation Method for Determining Cohesion Toughness K_(Ic)~c of Double-K Fracture Model

A new method for predicting reference temperature of ferritic steel using finite element analysis and master curve method

Numerical Simulation of Fracture Toughness on Nuclear Graphi te IG-11