Abstract:NbMoTaW refractory high entropy alloy (RHEA) possesses superior high temperature mechanical strength while the very low plastic strain at room temperature limits its practical applications. In present work, the method of adjusting composition was employed to improve the mechanical properties of (NbTaW)1-xMox (x=0, 0.05, 0.15, 0.25) alloys especially the plasticity at room temperature by the combination of experiments and first-principles calculations. Phase composition of the (NbTaW)1-xMox alloys identified using experiments and theoretical prediction were all single-phase solid solution. Microstructure and elements distribution of the alloys were characterized by SEM and EDS. All the as-casted alloys had dendrite structures and the grain size firstly increased (x<15) and then decreased (x>15) with the increase of Mo content. The compressive properties and the analysis of fracture surface demonstrated that strength and ductility of (NbTaW)1-xMox alloys were obviously enhanced with the decrease of Mo content. NbTaW MEA had the maximum mechanical strength (1460 MPa) and ductility (16.2%) in the designed alloys. Both the mechanical strength and plasticity at room temperature were greatly improved compared with that of NbMoTaW RHEA. The experimental results well agreed with that of first-principles calculations. The elastic anisotropy and microhardness of these alloys were also predicted. The orders of elastic anisotropy were (NbTaW)0.75Mo0.25 < (NbTaW)0.85Mo0.15 < (NbTaW)0.95Mo0.05 < NbTaW. The hardness of (NbTaW)1-xMox alloys were increased with increasing of Mo content. Optimizing composition was demonstrated to be an effective method to improve the mechanical properties of NbMoTaW refractory high entropy alloy.

Solid solution strengthening in Nb-Ta and Nb-Mo alloy single crystals

Solution Strengthening of Ductile Refractory HfMo X NbTaTiZr High-Entropy Alloys

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti2AlC

A new approach to understand the deformation behavior and strengthening mechanism of molybdenum alloy: From single crystal to polycrystal

Low temperature deformation of MoSi$_2$ and the effect of Ta, Nb and Al as alloying elements

Effect of Mo on the morphology, microstructure and mechanical properties of NbTa 0.5 TiMo x refractory high entropy alloy fabricated by laser powder bed fusion using elemental mixed powders

Solidification Microstructures of V-Nb-Mo-Ta-W Alloys: Insights from Non-equiatomic Alloys

Complex strengthening mechanisms in the NbMoTaW multi-principal element alloy

Crystal Structure, Transformation Strain, and Superelastic Property of Ti–Nb–Zr and Ti–Nb–Ta Alloys

Phase transformations in Ti-Nb-Ta and Ti-Nb-Ta-Zr alloys

Solute strengthening and softening from screw dislocation in BCC tantalum: A first-principles study

Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys

Effects of alloying elements (Sn, Nb, Cr, and Mo) on the microstructure and mechanical properties of zirconium alloys

Structure and properties of titanium-aluminum alloys doped with niobium and tantalum

Microstructure and Strength of a Tantalum-Tungsten Alloy after Cold Rolling from Small to Large Strains

Enhancement of tensile properties of Ti2AlNb alloy added with Ta element

Effect of Oxygen in Mo-TM (TM = Ti, Zr, Hf) Solid Solutions as Studied with Density Functional Theory Calculations

Stability and elasticity of metastable solid solutions and superlattices in the MoN-TaN system: a first-principles study

Microstructure and Room Temperature Mechanical Properties of Hf and Sn-Doped Nb-20ti-5cr-3al-18si Alloy