Abstract:In this paper, we consider the advantage of using the metallothermic method for producing alloys, in contrast to traditional methods. Using the HSC Chemistry 6.1 software package, thermodynamic modeling was performed. The possibility of obtaining intermetallic compounds by the joint aluminothermic reduction of Zr, Ta, Nb oxides is shown. The alloy was obtained by aluminothermic reduction of aluminum, zirconium, tantalum and niobium oxides in a resistance furnace, followed by grinding and powder size 40-100 microns. An experimental study of the sequence of phase formation and the boundaries of their existence was investigated using differential thermal analysis (DTA). The experiment was carried out on a STA 449 F3 Jupiter (NETZSCH) synchronous thermal analysis instrument in an argon flow GOST 10157-79 (the volume fraction of argon is at least 99.993%), the flow rate of the gas used was 30 ml/min. X-ray phase analysis (XRD) of the products (after DTA) was carried out on an XRD 7000 diffractometer (Shimadzu). By the relative intensity of the lines of the various phases, their quantitative ratio was estimated. The diffraction patterns were decoded using literature data, as well as the JCPDS (International Center For Diffraction Data) and ASTM (American Society for Testing and Materials) databases. According to the obtained XRD data, in the sample at temperatures of 954.5 and 1309.1 oС, respectively, the formation of a solid solution (Zr, Nb, Ta)Al2 occurs, which is isostructural to the intermetallic Al3Zr. In both cases, the concomitant ZrAl2 intermetallic compound is also formed. The performed study can serve as a scientific basis for the development of promising metallothermal technologies for the production of rare metal alloys.

Phase transformations in Ti-Nb-Ta and Ti-Nb-Ta-Zr alloys

Phase relationships and transformations in the ternary aluminum—titanium—tantalum system

Influence of Zr Content on Phase Transformation, Microstructure and Mechanical Properties of Ti75−xNb25Zrx (x = 0–6) Alloys

Effect of thermomechanical processing on evolution of various phases in Ti–Nb–Zr alloys

Metastable transformation behavior in a Ta-containing TiAl-Nb alloy during continuous cooling

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy

Influence of forging deformation and heat treatment on microstructure of Ti-xNb-3Zr-2Ta alloys

Superelastic and shape memory properties of TixNb3Zr2Ta alloys

Thermal Stability and High-Temperature Shape Memory Effect of Ti–Ta–Zr Alloy

Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel

Superelastic and Shape Memory Properties of Ti X Nb3Zr2Ta Alloys

Mechanical Properties and Phase Stability of Ti-Nb-Ta-Zr-O Alloys

Influence of β-Stabilizing Nb on Phase Stability and Phase Transformation in Ti-Zr Shape Memory Alloys: From the Viewpoint of the First-Principles Calculation

The compctition between martensite and omega in quenched Ti-Nb alloys

Exploration of Homologous Substitution Element on Phase Ratio and High Temperature Properties in High Nb-containing TiAl Alloy

Microstructure and Phase Transformation of Ni46Mn33Ga17Cu4−xZrx Alloys

Phase equilibria in the ZrO 2 –Ta 2 O 5 –Nb 2 O 5 system: Experimental studies and thermodynamic modeling

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

Investigation of the features of phase formation in the joint aluminothermic reduction of ZrO2, Ta2O5, Nb2O5

Interdiffusion Coefficients and Strengthening Effects of Nb, Ta, and Zr in the α2-Ti3Al Phase

Effects of Nb on Superelasticity and Low Modulus Properties of Metastable Β-Type Ti-Nb-Ta-Zr Biomedical Alloys