Abstract:The synthesized InSb‐10%C anode for rechargeable magnesium batteries shows a high capacity of 448 mA h g–1, and a high‐rate performance of 168 mA h g–1 at 500 mA g–1, thanks to the stabilized cellular graphitized amorphous carbon structure, and is also promising in the full cell matched with a chlorine‐free ether‐based electrolytes. Pure magnesium anode used in rechargeable magnesium batteries (RMB) exhibits high theoretical capacity but has been challenged by the passivation issue with conventional electrolytes. Alloy‐type anodes have the potential to surpass this issue and have attracted increasing attention. However, the kinetic performance and stabilities of conventional alloy anodes are still constrained. In this study, the InSb‐10%C anode is synthesized by a two‐step high‐energy ball milling process. The InSb‐10%C anode exhibits a remarkably high capacity of up to 448 mA h g−1, significantly improved cycle performance (234 mA h g−1 at 100 cycles) and rate performance (168 mA h g−1 at 500 mA g−1). The above‐mentioned superior performance of the InSb‐10%C anode for RMBs is attributed to the cellular graphitized amorphous carbon composite structure (CGA) which effectively refines the particle size and restricts the volume expansion. Additionally, the reduced surface electron density of InSb combined with the high conductivity resulting from graphitization enhances the Mg2+ diffusion performance. Notably, the InSb‐10%C anode demonstrates good compatibility with conventional halogen‐free salt ether‐based electrolytes in the full battery configuration.

AS61 Magnesium Alloy with Nano-Scale Mg 2 Sn Phase as a Novel Anode for Primary Aqueous Magnesium Battery

Micro-alloyed Mg–Al–Sn anode with refined dendrites used for Mg-air battery

Dissolution Mechanism of Eutectic and Hypereutectic Mg-Sn Alloy Anodes for Magnesium Rechargeable Batteries

Enhancing Magnesium-Ion Storage in a Bi-Sn Anode through Dual-Phase Engineering

Electrochemical corrosion behavior of Mg-Al-Sn alloys with different morphologies of β-Mg 17 Al 12 phase as the anodes for Mg-air batteries

Building Organic–Inorganic Robust Interphases from Deep Eutectic Solution for Highly Stable Mg Metal Anode in Conventional Electrolyte

Synchrotron X‐ray Spectroscopic Investigations of In‐Situ‐Formed Alloy Anodes for Magnesium Batteries

A micro-alloyed Mg-Zn-Ge alloy as promising anode for primary Mg-air batteries

The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery

High Voltage Magnesium-ion Battery Enabled by Nanocluster Mg3Bi2 Alloy Anode in Noncorrosive Electrolyte.

Achieving Ultrahigh Anodic Efficiency via Single-Phase Design of Mg–Zn Alloy Anode for Mg–Air Batteries

Synergistic Mixture of Electrolyte Additives: A Route to a High-Efficiency Mg-Air Battery

High Anodic-Efficiency and Energy-Density Magnesium-Air Battery with Modified AZ31 Anode

Constructing dilute Mg-1.0In binary alloy: A pathway to enhanced anode performance in Mg-air battery

Unlocking the Power of Magnesium Batteries: Synergistic Effect of InSb‐C Composites to Achieve Superior Electrochemical Performance

A Novel Asymmetric Diffusion Path for Superior Ion Dynamic in High-Voltage Mg-Based Hybrid Batteries

Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg 41 Nd 5 in Mg-4Li-3Nd-0.2Zn alloy

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Electrochemical properties and discharge performance of Mg-3Sn-xCa alloy as a novel anode for Mg-air battery

Multi-elemental Synergistic Optimization of Mg-Ge-In-Zn as a Promising Anode for Primary Mg-Air Batteries

A Novel 3D Li/Li9Al4/Li‐Mg Alloy Anode for Superior Lithium Metal Batteries