Abstract:In this study, the electrochemical performance and discharge behavior of Mg-Li-Zn-Gd alloys with α-Mg and β-Li-based anode material are investigated, with the aim to improve the anode performance of Mg-air batteries. The experimental anode alloys with detailed Mg-8Li-xZn-yGd (x = 1, 2, 3; y = 1, 2, 3 wt.%) components are prepared, and extrusion deformation is carried out on these alloys. Simultaneously, scanning electron microscope (SEM), X-ray diffractometer (XRD), electrochemical workstation, and constant current discharge systems are applied for microstructure characterization, corrosion, and discharge performance testing. The results show that the experimental alloys are composed of an α-Mg and β-Li dual matrix, with W-Mg3Gd2Zn3, Mg3Gd, and MgLiZn second phases. Meanwhile, extrusion deformation promotes the recrystallization process through the particle-induced nucleation mechanism. The corrosion resistance is improved with the increasing Zn/Gd ratio, and the extruded Mg-8Li-2Zn-1Gd (LZG821) alloy exhibits the optimum corrosion resistance, with a corrosion rate of 0.493 mm·year−1. In addition, the extruded Mg-8Li-1Zn-1Gd (LZG811) alloy has the optimal discharge performance, with a discharge specific capacity of 1371.04 mA·g−1 at a current density of 40 mA∙cm−2, and its anode efficiency reaches nearly 70%. The poorer discharge properties of the Mg-8Li-2Zn-1Gd (LZG821) and Mg-8Li-2Zn-3Gd (LZG823) alloys are attributed to their refined grains, which could bring severe intergranular corrosion while increasing the grain boundary density.

Electrochemical corrosion behavior of Mg-Al-Sn alloys with different morphologies of β-Mg 17 Al 12 phase as the anodes for Mg-air batteries

Micro-alloyed Mg–Al–Sn anode with refined dendrites used for Mg-air battery

The electrochemical corrosion behaviors and Mg-air battery anode performance of Mg–1Sn–1Ca-0.3Mn alloy with different grain size and Mg 2 Ca morphology

Tailoring the electrochemical behavior and discharge performance of Mg–Al–Ca–Mn anodes for Mg-air batteries by different extrusion ratios

Effects of Zn/Ca alloying on the Second Phase, Corrosion Behavior and Mg‐air Battery Anodic Performance of Mg‐1Sn‐based Alloys

Tailoring the microstructure of Mg-Al-Sn-RE alloy via friction stir processing and the impact on its electrochemical discharge behaviour as the anode for Mg-air battery

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

Corrosion and discharge performance of a magnesium aluminum eutectic alloy as anode for magnesium–air batteries

The semi-continuous (Mg,Al) 2 Ca second phase on Mg-Al-Ca-Mn alloys as an efficient anti-corrosion anode for Mg-air batteries

Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content

Enhancing the Electrochemical Performance of Al-Mg-Sn-Ga Alloy Anode for Al-Air Battery by Solution Treatment

Effect of Sn/Ca Mass Ratio on the Second Phase, Corrosion Behavior and Discharge Performance of Mg–xSn–1Ca Mg–Air Battery Anodes

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Electrochemical Performance of Al-1Zn-0.1In-0.1Sn-0.5Mg-xMn (x = 0, 0.1, 0.2, 0.3) Alloys Used as the Anode of an Al-Air Battery

Revealing the influence of crystallographic orientation on the electrochemical and discharge behaviors of extruded diluted Mg–Sn–Zn–Ca alloy as anode for Mg-air battery

Mg storage properties and reaction mechanism of PbSn alloy films in Mg ion batteries

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion

AS61 Magnesium Alloy with Nano-Scale Mg 2 Sn Phase as a Novel Anode for Primary Aqueous Magnesium Battery

Dissolution Mechanism of Eutectic and Hypereutectic Mg-Sn Alloy Anodes for Magnesium Rechargeable Batteries

Effects of trace amounts of Sn, Ca, and Cu on the electrochemical properties and discharge performance of Mg-2Zn-1Gd-0.5Zr as an anode for Mg-air battery