Abstract:We have investigated the physical origin of anomalous in-plane thermal expansion (TE) anisotropy leading to invar-like behavior and negative TE in nanostructured NiTi sheets manufactured via severe cold-rolling. The roles of grain size (GS), crystallographic texture, thermally-induced phase transformation, and intrinsic (lattice level) TE of austenite (B2) and martensite (B19′) phases on the macroscopic TE behavior are addressed. It is shown that by controlling the cold-rolling thickness reduction and heat-treatment temperature the coefficient of thermal expansion (CTE) can be controlled in a wide range from positive (α ∼ 2.1 × 10−5 K−1) to negative (α ∼ −1.1 × 10−5 K−1) via in-plane anisotropy of TE. A very small CTE of α ∼ −5.3 × 10−7 K−1 (invar-like behavior) in a wide temperature window of 230 K (353–123 K) is obtained at an angle of 33.5° to the rolling direction (RD) of the severely cold-rolled sheet. TEM and XRD studies show that the microstructure underlying such anomalous TE behavior consists of a mixture of B2 nano-grains and retained/residual deformation-induced martensite and that the observed anomalous TE anisotropy is due to the intrinsic anisotropic TE of residual martensite. The invar-like behavior is the result of the cancellation of the positive TE of austenite phase with the negative TE of residual martensite along 33.5° to the RD. A simple rule of mixture model incorporating the intrinsic TE of B2 and B19′ lattices and the texture coefficients of the sample is proposed which successfully captures the anomalous in-plane TE anisotropy. The discovery of high dimensional stability over a wide temperature window along with temperature insensitive non-hysteretic linear superelasticity of the severely-deformed NiTi opens up a new route for designing stable SMAs for applications in ragged environments.

Elinvar property of cold-rolled NiTi alloy

Elinvar effect in severely-deformed Ti-50.8(at%)Ni thin belt

Multifunctional nanostructured NiTi alloy with Invar, Elinvar and Rinvar properties

Influence of aging temperature on physical properties of a 40NiCrTiAl Elinvar alloy

A New Mechanism for Low and Temperature-Independent Elastic Modulus

Tuning temperature coefficient of elastic modulus by heat treatment in a compositionally-modulated Ti-Nb-based alloy

Temperature Dependence of Elastocaloric Effect in a Microstructurally Graded NiTi Alloy

Origin of zero and negative thermal expansion in severely-deformed superelastic NiTi alloy

Grain boundary and dislocation strengthening of nanocrystalline NiTi for stable elastocaloric cooling

Anisotropy of elastocaloric cooling effect in equal atomic ratio NiTi alloy with crystallographic texture

Stable and Large Superelasticity and Elastocaloric Effect in Nanocrystalline Ti-44Ni-5Cu-1Al (at%) Alloy

In-plane low thermal expansion of NiTi via controlled cross rolling

Low-fatigue and Large Room-Temperature Elastocaloric Effect in a Bulk Ti49.2Ni40.8Cu

Equivalent Heat Treatments and Mechanical Properties in Cold-Rolled TiNiFe Shape-Memory Alloys

Elastocaloric Effect Induced by the Rubber-Like Behavior of Nanocrystalline Wires of A Ti-50.8ni (at.%) Alloy

Damping behavior of a cold-rolled TiNi alloy

Low-fatigue and Large Room-Temperature Elastocaloric Effect in a Bulk Ti49.2Ni40.8Cu10 Alloy

Imparting High Elastocaloric Cooling Potential to NiTi Alloy by Two-Step Enhancements

Elinvar Effect in Co-doped TiNi Strain Glass Alloys

Inverse Elastocaloric Effect in a Ti-Ni Alloy Containing Aligned Coherent Particles of Ti3Ni4

Giant Elastocaloric Effect with Wide Temperature Window in an Al-doped Nanocrystalline Ti–Ni–Cu Shape Memory Alloy