Abstract:In this study, we demonstrate the direct in-situ synthesis of NiTi alloys with tunable chemical composition (Ni/Ti atomic ratio) and corresponding thermomechanical response. This synthesis is achieved by regulating the feeding speed ratio of pure Ni and Ti wires during the additive manufacturing process based on dual-wire-feed electron beam directed energy deposition (EB-DED) technology. Under appropriate process conditions, the resulting NiTi alloys exhibit a controllable evolution around the nearequiatomic composition and display a typical columnar grain morphology characteristic of additively manufactured NiTi alloys. With an increase in Ni content (shifting from Ti-rich to Ni-rich), the second phase particles present in the samples change from Ti-rich phase (Ti2 Ni) to Ni-rich phases (such as Ni4 Ti3 and Ni3 Ti2 ). The phase transformation temperatures gradually decrease with increasing Ni content, and the predominant matrix phase transitions from martensite to austenite. The as-built NiTi alloy exhibits a typical tensile curve with a good tensile elongation of 11 %, fabricated under suitable composition and microstructure conditions. This result surpasses values reported in current in-situ synthesized NiTi alloys through additive manufacturing methods. Moreover, it almost reaches the levels achieved by additively manufactured NiTi alloys using pre-alloyed raw materials. Furthermore, this study reports, for the first time in the field of in-situ synthesized NiTi alloys, a good tensile shape memory effect, achieving an impressive recovery rate of up to 70 % under a tensile strain of 6 %. This investigation provides a meaningful theoretical perspective and technical strategy for the integrated customization of NiTi alloy components in structure, composition, and function. This low-cost and high-efficiency approach is particularly attractive for the preparation of functional graded, large-scale and disposable NiTi components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Multifunctional nanostructured NiTi alloy with Invar, Elinvar and Rinvar properties

Elinvar property of cold-rolled NiTi alloy

Tuning Thermal Expansion by a Continuing Atomic Rearrangement Mechanism in a Multifunctional Titanium Alloy

Origin of zero and negative thermal expansion in severely-deformed superelastic NiTi alloy

Achieving stable actuation response and elastocaloric effect in a nanocrystalline Ti50Ni40Cu10 alloy

Fabrication of multi-functional Ni–Ti alloys by laser powder bed fusion

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Design of a V-Ti-Ni alloy with superelastic nano-precipitates

Investigation of Temperature-Dependent Magnetic Properties and Coefficient of Thermal Expansion in Invar Alloys

Promoting nanoprecipitates via prefabricated defects to pin dislocations and grain boundaries for trading off high-strength and low-thermal-expansion of invar alloys

Origin of the inverse elastocaloric effect in a Ni-rich Ti-Ni shape memory alloy induced by oriented nanoprecipitates

In-situ Synthesis of NiTi Shape Memory Alloys with Tunable Chemical Composition and Thermomechanical Response by Dual-Wire-feed Electron Beam Directed Energy Deposition

Nano-precipitation leading to linear zero thermal expansion over a wide temperature range in Ti22Nb

High damping performances over wide temperature range in the B doped Ti-Ni shape memory alloys

Strengthening of the Fe-Ni Invar Alloy Through Chromium

Microstructure-property relationship in Zr-alloyed Ni-rich NiTi alloys: Enhancements in high-temperature stability and superelasticity

Cryogenic superelasticity and elastocaloric effect in a nanostructured Ti-Ni-Co alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Imparting High Elastocaloric Cooling Potential to NiTi Alloy by Two-Step Enhancements

Influence of Addition of Ti Particles and Processing Condition on Microstructure and Properties of Selectively Laser-Melted Invar 36 Alloy