Abstract:3D monolithic integration of logic and memory devices has emerged as one of the key enablers for next-generation electronic devices to address the ever-increasing demand for higher integration density, better performance and energy efficiency. BEOL-compatible oxide semiconductors show great potential to revolutionize the field thanks to their unique properties [1]. We present our recent advancement related to BEOL-compatible oxide semiconductors for logic and memory applications. The digital-etch-enabled nanowire transistors and α -IGZO-based eDRAM will first be discussed, followed by the ferroelectric (FE) memories with high performance and novel structures utilizing α -IGZO or ALD-deposited ZnO as the channel. Ultra-scaled amorphous IGZO ( α -IGZO) nanowire field-effect transistors (NW-FETs) hold great potential for applications demanding high performance and integration density. To realize the fabrication of high-quality and aggressively-scaled nanowire structures, a novel digital etching method for amorphous α -IGZO materials has been proposed and demonstrated [2]. Confirmed by the SEM images of an α -IGZO nanowire before and after digital etching, a notable nanowire width W NW reduction can be observed. We have the thinnest α -IGZO nanowire achieved by the digital etching with a W NW of approximately 20 nm. By further developing the transistor upon the nanowire, the α -IGZO NW-FET attains a good subthreshold swing (SS) of 80 mV/decade and a high peak extrinsic transconductance ( G m, ext ) of 612 μS/μm at V DS of 2 V (456 μS/μm at V DS = 1 V). Compared to the previous studies, our IGZO NW-FET achieves one of the highest peak G m values among all IGZO-based FETs. Besides the BEOL compatibility and high on-current, ultra-low subthreshold leakage makes α -IGZO FETs extremely promising for eDRAM. We further investigated the potential of α -IGZO eDRAM by developing the charge-domain compute-in-memory (CiM) [3]. Experiments have demonstrated small SS, large on-state current, and long-time charge retention with our dedicated 4T1C memory cell. With differential cell structure, an even higher tolerance for charge loss can be attained. With experiment-calibrated benchmarking in the VGG-8 network for CIFAR-10 image classification tasks, 2092 TOPS/W power efficiency for the CiM core can be expected, outperforming the prior TFT and CMOS-based CiM approaches, exhibiting significant advantages for ultra-low-power applications. The integration of doped-HfO 2 FE material and oxide semiconductor, both BEOL-compatible with large-scale and cost-effective deposition, presents a promising avenue for advancing data storage in the future. We have developed the high-performance α -IGZO Fe-FET with a metal-ferroelectric-metal-oxide-semiconductor (MFMIS) structure as well as the Fe TCAM [4]. The α -IGZO Fe-FET achieves a large memory window of ~3 V with high reliability, while the Fe TCAM reduces the transistor number from 16 to 2 compared to the traditional SRAM-based one. Besides α -IGZO, we believe that ALD-based oxide semiconductors featuring high controllability of film thickness and conformal coverage of the 3D structures can create new opportunities for novel device structure and integration. The fin-gate ZnO Fe-FET stands for a great example while not only outstanding device performance but also suppressed device-to-device variation due to the unique structure have been demonstrated, holding tremendous promise for high-density 3D integration [5]. Acknowledgments: This work is supported by Singapore Ministry of Education (Tier 2: MOE2018-T2-2-154, Tier 1: R-263-000-D65-114). References : [1] S. Dutta et al. , IEDM, p. 36.4., 2020. [2] K. Han et al. , VLSI , 2021, p. T10-1. [3] J. Liu et al. , IEDM , 2021, p. 46.2. [4] C. Sun et al. , VLSI , 2021, p. T7-4. [5] Q. Kong et al. , IEDM , 2022, p. 12.3.

A design methodology for highly reliable operation for 2T0C DRAM application based on IGZO CAA FeFETs

Computational Associative Memory with Amorphous Metal‐Oxide Channel 3D NAND‐Compatible Floating‐Gate Transistors

Modeling the Thermal Characteristics of Stacked 2T0C Memory Array Based on InGaZnO4 Thin-Film Transistors

Highly Scaled InGaZnO Ferroelectric Field-Effect Transistors and Ternary Content-Addressable Memory

Low Power and Temperature-Resilient Compute-In-Memory Based on Subthreshold-FeFET

(Invited) BEOL-Compatible Oxide Semiconductor Logic and Memory Devices

First demonstration of 2T0C-FeDRAM: a-ITZO FET and double gate a-ITZO/a-IGZO FeFET with a record-long multibit retention time of >4-bit and >2000 s

3D-Stacked 2T0C-DRAM Cells Using Al2O3/TiO2-Based 2DEG FETs

Optimized IGZO FETs for Capacitorless DRAM with Retention of 10 Ks at RT and 7 Ks at 85 °C at Zero Vhold with Sub-10 Ns Speed and 3-Bit Operation

3-Terminal Igzo FET Based 2T0C DRAM Combined Bit-Line Structure

High Performance 2T0C DRAM Cells Based on Atomic-Layer-deposited InAlZnO FETs

Design and Simulation Analysis of a 3TnC MLC FeRAM Using a Nondestructive Readout and Offset-Canceled Sense Amplifier for High-Density Storage Applications

Atomic-Layer-Deposited Ultrathin InAlZnO FETs-Based 2T0C DRAM Cells With Long Data Retention and Multilevel Storage

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf0.5Zr0.5O2 Ferroelectric Memory Arrays

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf$_{\text{0}.\text{5}}$Zr$_{\text{0}.\text{5}}$O$_{\text{2}}$ Ferroelectric Memory Arrays

Capacitorless DRAM Cells Based on High-Performance Indium-Tin-Oxide Transistors with Record Data Retention and Reduced Write Latency

First Experimental Demonstration of 3D-Stacked 2T0C DRAM Cells Based on Indium Tin Oxide Channel

Reconfigurable 3D Stacked Oxide Semiconductor Devices for Hybrid In-Memory Computing

A Novel CMOS FEOL-Embedded Asymmetrical FET for Capacitor-less and Long-Retention DRAM Based on 300mm Logic Foundry Platform

3D Nano Hafnium‐Based Ferroelectric Memory Vertical Array for High‐Density and High‐Reliability Logic‐In‐Memory Application

Progress in Z(2)-Fet 1T-Dram: Retention Time, Writing Modes, Selective Array Operation, and Dual Bit Storage