Abstract:To reveal the phase formation mechanism and the strengthening mechanism, the AlxCo4Cr1.5Fe1.5Ni5 alloys (x = 1.0, 1.2, 1.4, 1.6, 1.8, 2.0) were prepared by arc melting. Phase formation and prediction, tensile properties, strengthening mechanism and deformation mechanism were researched in detail. Results show that the microstructure of AlxCo4Cr1.5Fe1.5Ni5 alloys changes from single FCC phases (x ≤ 1.4)) to FCC and BCC phases (x>1.4), which was in good agreement with the calculated phase diagram (CALPHAD) prediction. The lower mixing enthalpy of Ni-Al leads to the segregation of Al element at the inter-dendritic region, which promotes the formation of BCC and FCC lamellar structure in hypoeutectic Al2Co4Cr1.5Fe1.5Ni5 alloy. The ultimate tensile strength of Al2Co4Cr1.5Fe1.5Ni5 alloy is 835 MPa, meanwhile the fracture strain is 31.8 %. The tensile strength of Al2Co4Cr1.5Fe1.5Ni5 alloy is attributed to the interface strengthening and the solid solution strengthening. The massive cross slip of dislocations in primary FCC phases and the dense dislocations blocked by the FCC-BCC interface increase the tensile strength. The interface barrier strength of the BCC-FCC interface in Al2Co4Cr1.5Fe1.5Ni5 alloy was estimated to be 3.9 GPa, which shows the higher barrier strength than conventional BCC-FCC interfaces. Coupled effects of the primary FCC and the lamellar structure of FCC and BCC phases will maintain good mechanical properties.

Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Microstructural features and excellent compression properties of a novel Al0.7CoCrFeNiTi0.3 high entropy alloy

Mechanical Performance of the Alxcocrcufeni High-Entropy Alloy System with Multiprincipal Elements

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Balanced mechanical properties of Al0.3CoCrFeNiTix high-entropy alloys by tailoring Ti content and heat treatment

On Microstructure and Mechanical Performance of AlCoCrFeMo0.5Nix High-Entropy Alloys

Plastic Deformation Behaviors and Mechanical Properties of Advanced Single Crystalline CoNi-base Superalloys

Microstructure and Mechanical Properties of New AlCo<sub>x</sub>CrFeMo<sub>0.5</sub>Ni High-Entropy Alloys

Microstructure and properties of Al0.5CoCrCuFeNiTix (x = 0-2.0) high-entropy alloys

High-Temperature Mechanical Behavior of Cobalt-Free FeMnCrNi(Al) High-Entropy Alloys

Microstructure and High-Temperature Mechanical Properties of CrMnFeCoNi/TiAl Composites Prepared by Powder Metallurgy

Effect of Aluminum Content on Microstructure and Mechanical Properties of Al X CoCrFeMo0.5Ni High-Entropy Alloys

Contribution of coherent precipitates on mechanical properties of CoCrFeNiTi 0.2 high-entropy alloy at room and cryogenic temperatures

Solution Strengthening of Ductile Refractory HfMo X NbTaTiZr High-Entropy Alloys

Composition design, microstructure, and mechanical properties of novel Ti–Co–Ni–Zr complex concentrated alloys

Tensile properties and fracture toughness of TiAl alloys with controlled microstructures

Effect of Aluminum, Iron and Chromium Alloying on the Structure and Mechanical Properties of (Ti-Ni)-(Cu-Zr) Crystalline/Amorphous Composite Materials

Communications Formation of Simple Crystal Structures in Cu-CoNi-Cr-Al-Fe-TiV Alloys with Multiprincipal Metallic Elements

Formation of hypoeutectic structure and strengthening mechanism of Co4Cr1.5Fe1.5Ni5 high entropy alloy alloyed by Al